Panasonic BMET500 - CAMERA HEAD UNIT Kullanım Talimatları Kılavuzu - Sayfa 11

Dijital Kamera Panasonic BMET500 - CAMERA HEAD UNIT için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic BMET500 - CAMERA HEAD UNIT 24 sayfaları. Iris camera

Sayfayı Yazdır

INSTALLATIONS AND CONNECTIONS

WARNING
The installation described in these figures should be made
by qualified service personnel or trained system installers.
Cautions:
• This system must be installed within the protected
promise in accordance with the National Electrical
Code (NFPA70), and the local authorities having juris-
diction.
• Attach this unit to a flat wall with the supplied mounting
bracket. After the installation, secure the unit to prevent
dropping.
I Caution on Installation
Secure the unit with the supplied mounting bracket to pre-
vent vibration, dropping and injury.
Notes:
• Keep the unit:
in the temperature between 0 °C and 40 °C {between
•
32 °F and 104 °F} and the humidity between 30 % and 80 %.
Top View
Coaxial cable (BNC)
BM-ET500
(For
enrollment)
General-purpose
power supply *
(24 V DC)
Administration PC*
* The use of the Administration PC was not evaluated by UL.
* The use of electric lock was not evaluated by UL.
* The use of door control box was not evaluated by UL.
* General-purpose power supply must be a UL Listed access control power limited device.
Keep this area free
from obstructions
400 mm {16 in.}
900 mm {35 in.}
1 300 mm {51 in.}
System Instruction (Maximum System)
OK
NG
Camera 3
LAN
• Keep the unit away from:
direct sunlight or light reflection.
•
incandescent or halogen lighting.
•
places where shadow appear over the front panel.
•
noise. (for example, places near air conditioners or ven-
•
tilators)
electricity.
•
outdoor places.
•
vibration. (It may cause invalid recognition or injury.)
•
• Do not place anything inside the space described in
the illustration.
• This unit is for indoor use only.
• This unit must be mounted horizontally on the wall.
• Determine the optimum mounting height. The recom-
mendation is between 1.38 m {54 in.} and 1.5 m {60 in.}
for enrollment/recognition effectiveness.
• Mount the bracket on the wall. Be sure to provide
access for video control and DC power from the control
unit.
Side View
80 mm {3 in.}
400 mm {16 in.}
Coaxial cable (BNC)
Camera power cable
BM-ED500
POWER
ALARM S3
S2
S1
Camera 1
Camera 2
Wiegand
or RS-485
Door control box* Access server*
Keep this area free
from obstructions
900 mm {35 in.}
1 300 mm {51 in.}
Floor
OK
NG
BM-ET500
(For recognition)
OK
NG
BM-ET500
(For recognition)
Electric lock*
Electric lock*
In the case of Wiegand / RS-485 use
11