Panasonic BMET500 - CAMERA HEAD UNIT Kullanım Talimatları Kılavuzu - Sayfa 5

Dijital Kamera Panasonic BMET500 - CAMERA HEAD UNIT için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic BMET500 - CAMERA HEAD UNIT 24 sayfaları. Iris camera

Sayfayı Yazdır

PREFACE

Iris Camera BM-ET500 is used in an access control system. The iris camera, which captures a user's iris image with the control

by Control Unit BM-ED500, is available for following uses.

(Control Unit BM-ED500 is sold separately, however, it must be used in combination with the iris camera.)

• As an enrollment camera for iris image capturing and Administration PC enrollment

To activate iris recognition, it is necessary to capture the iris images of a user and enroll the iris data in the administration

PC. A control unit (for enrollment) generates iris data from iris images captured by an iris camera (for enrollment), and

transfers the data to the administration PC in the LAN (Local Area Network). The iris data is enrolled in the iris database of

the administration PC. Up to 2 000 users can enroll their iris data. *

To administer the iris data captured by an iris camera and generated by a control unit, you need to install the optional

Administration Software BM-ES500E onto a PC. Refer to the manuals of BM-ES500E for details.

• As a recognition camera for iris recognition

The user can have his/her iris image captured only by looking at the iris camera (for recognition). It will take approx. 3 sec-

onds between capturing and recognition.*

(ACCEPT/REJECT) on the front side of the iris camera.

Iris data of up to 1 000 users can be distributed from the administration PC to recognition cameras.

The recognition time may differ

depending on capturing condi-

tions.

The iris camera (for enrollment)

captures the iris images of both

eyes at the same time, but the iris

data of each eye is enrolled sepa-

rately.

Capturing diagnosis is made by

the administration software at the

time of enrollment.

Up to 127 gate systems (an iris

camera and control unit) can be

connected to the administration

PC in the LAN. The control unit

can also be used as both for

enrollment and recognition by

changing the operation mode.

• Iris recognition technology is a way to identify a person with iris patterns (an iris is the thin

plate-shaped film in front of the eyeball), which differ among each person. The iris pattern of

the left eye differs from that of the right eye.

• Using iris cameras, users can carry out recognition without touching any devices.

• The iris data of users need to be enrolled in the administration PC. In the iris recognition

process, the users are recognized with the enrolled iris data.

The user can check the recognition result with the status indicator

Enrollment

Recognition

For enrollment (an iris camera and a control unit)*

Iris images of both eyes are captured by an iris camera (for

enrollment), generated into the iris data by a control unit (for

enrollment), transferred to the administration PC. Then, the iris data

POWER

ALARM S3

is enrolled into and managed in the iris database. *

Iris Camera

Control Unit

BM-ET500

BM-ED500

Enrolled iris data is distributed

to the control unit (for recognition).

POWER

ALARM S3

For recognition (an iris camera and a control unit)*

The iris camera (for recognition) captures the iris images

of both eyes, generates the iris data from the iris images,

and recognizes a user by comparing the iris data with the

those distributed to the control unit (for recognition).*

Administration PC

Administration Software BM-ES500E*

Iris database

Iris

Retina

Pupil