HP 1405-5 Kurulum ve Başlangıç Kılavuzu - Sayfa 36
Anahtar HP 1405-5 için çevrimiçi göz atın veya pdf Kurulum ve Başlangıç Kılavuzu indirin. HP 1405-5 44 sayfaları. 1405 switch series
Ayrıca HP 1405-5 için: Hızlı Başlangıç Kılavuzu (16 sayfalar), Kurulum ve Başlangıç Kılavuzu (45 sayfalar)
Sayfayı Yazdır
Specifications
Twisted-Pair Cable/Connector Pin-Outs
N o t e
.
A-6
Straight-through Twisted-Pair Cable for
10 Mbps or 100 Mbps Network Connections
Because of the Auto-MDIX operation of the 10/100 ports on the switch, for all
network connections, to PCs, servers or other end nodes, or to hubs or other
switches, you can use straight-through cables.
If any of these ports are given a fixed configuration, for example 100 Mbps/
Full Duplex, the ports operate as MDI-X ports, and straight-through cables
must be then used for connections to PC NICs and other MDI ports.
Cable Diagram
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2
on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6
on connector "B".
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired
in the cable.
Pin Assignments
Switch End (MDI-X)
Signal
Pins
receive +
1
receive -
2
transmit +
3
transmit -
6
Computer, Transceiver, or
Other End
Pins
Signal
1
transmit +
2
transmit -
3
receive +
6
receive -