HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu - Sayfa 11

Anahtar HP 316095-B21 - StorageWorks Edge Switch 2/24 için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP 316095-B21 - StorageWorks Edge Switch 2/24 32 sayfaları. Edge switch release notes
Ayrıca HP 316095-B21 - StorageWorks Edge Switch 2/24 için: Güncelleme Kılavuzu (9 sayfalar), Manuel (41 sayfalar), Manuel (40 sayfalar), Yayın Notu (27 sayfalar), Manuel (26 sayfalar), Yayın Notu (27 sayfalar), Yayın Notu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (18 sayfalar), Talimatlar Kılavuzu (17 sayfalar), Yayın Notu (17 sayfalar), Yükseltme Talimatları (16 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar), Yayın Notu (16 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (11 sayfalar)

Upgrading from an earlier version of ﬁrmware

Upgrading to ﬁrmware 07.01.02-4 is non-disruptive to attached devices. The director

or edge switch is not required to be ofﬂine before performing an upgrade operation.

Limitations to upgrades are clearly identiﬁed if there are any limitations to performing

the operation.

Before upgrading ﬁrmware, it is highly recommended that you back up the director or

edge switch conﬁguration. Refer to your HP StorageWorks director or edge switch

Element Manager user guide for more information. Embedded Web Server (EWS)

also provides an option to print or save product conﬁguration to a ﬁle. Refer to the

HP StorageWorks Embedded Web Server User Guide for more information.

All products must be running ﬁrmware 06.00.00 or later before upgrading to

07.01.02-4. If a switch is operating with a ﬁrmware level earlier than 06.00.00, you

must upgrade to 06.xx.xx before installing 07.01.02-4.

Upgrades and downgrades are supported only from one major release to the next, such

as from 06.xx.xx to 07.01.02-4. If EWS is used for upgrades and downgrades, and this

rule is not followed, errors occur and there may be a disruption to attached devices.

If upgrading to ﬁrmware 06.02.00-22 requires you to upgrade from 04.xx.xx to

05.xx.xx in the process, there are special considerations:

•

For directors, refer to

05.xx.xx

•

For edge switches, refer to

to 05.xx.xx

A small number of early-shipped Surestore Director FC-64 units may receive one of the

following messages when they upgrade to ﬁrmware 05.02.00-13:

•

HAFM—Firmware cannot be loaded due to insufﬁcient CTP memory.

•

EWS—File System Error: Insufﬁcient memory for new ﬁrmware version.

This occurs only in certain units with CTP cards. Units with CTP2 cards do not have

this issue.

If you get one of these messages during the upgrade, the ﬁrmware upgrade failed, but

the unit continues working with the existing ﬁrmware without an interruption in service.

The upgrade process checks for sufﬁcient memory before activating the new ﬁrmware

image. The ﬁrmware upgrade does not complete without sufﬁcient memory. Please

contact HP Customer Support if you receive this message.

Upgrading ﬁrmware on a director from 04.xx.xx to

Upgrading ﬁrmware on an edge switch from 04.xx.xx

HA-Fabric Manager release notes