HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu - Sayfa 14

Anahtar HP 316095-B21 - StorageWorks Edge Switch 2/24 için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP 316095-B21 - StorageWorks Edge Switch 2/24 27 sayfaları. Edge switch release notes
Ayrıca HP 316095-B21 - StorageWorks Edge Switch 2/24 için: Güncelleme Kılavuzu (9 sayfalar), Manuel (41 sayfalar), Manuel (40 sayfalar), Yayın Notu (32 sayfalar), Yayın Notu (27 sayfalar), Manuel (26 sayfalar), Yayın Notu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (18 sayfalar), Talimatlar Kılavuzu (17 sayfalar), Yayın Notu (17 sayfalar), Yükseltme Talimatları (16 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar), Yayın Notu (16 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (11 sayfalar)

Downgrades directly to 05.03.01 from 06.xx.xx is not concurrent when the

second-generation Edge Switch 2/24 is conﬁgured in Open Fabric operating

mode. In other words, downgrades in Open Fabric mode cannot be done with the

second-generation Edge Switch 2/24 online without disrupting port operations. Since

second-generation Edge Switch 2/24 switches cannot be downgraded earlier than

05.03.01, they must be conﬁgured in Homogeneous Fabric Interoperability mode to

remain concurrent. If this process is not followed, I/O through the switch may be

signiﬁcantly disrupted or stopped. Recovery for this situation is accomplished by

reactivating the current zone set.

If you are installing a new or replacement second-generation Edge Switch 2/12 or Edge

Switch 2/24 into an existing 05.xx.xx fabric, HP recommends that you downgrade

the unit before installing it into the fabric.

Downgrading to 05.05.00 is supported only on ﬁrst-generation Edge Switch 2/12

switches. Second-generation Edge Switch 2/12 switches can be downgraded only to

05.05.01. Second-generation Edge Switch 2/24 switches can be downgraded only

to 05.03.01.

If a Director 2/140 in a multiswitch fabric is downgraded earlier than 06.02.00, ISLs

could become segmented if there are any other switches in the fabric operating with a

ﬁrmware version earlier than 06.01.00. To prevent this situation, downgrade all Director

2/140s in the fabric to 06.01.00 before downgrading any products in the fabric to

05.xx.xx. This problem only exists with Director 2/140s in the fabric. HAFM displays a

warning message if a downgrade from 06.02.00 is attempted, but you can continue

with the downgrade if desired.

NOTE:

The warning message is displayed when downgrading any model from 06.02.00, but

only applies to downgrade operations for the Director 2/140.

Firmware downgrades should not be performed using EWS and Internet Explorer

v5.00.3315.1000x. If this operation is performed, the download operation may not

complete and may eventually time-out leaving the switch with the previous version of

ﬁrmware.

HAFM upgrade required for ﬁrmware version 07.xx.xx

To upgrade to ﬁrmware 07.01.02-4, you must ﬁrst upgrade the HAFM software to

07.01.00-9 minimum, if you are using the notebook HAFM server to manage the

director or edge switch. The HAFM software is contained on the HP StorageWorks

ha-fabric manager documentation and software CD (Part Number 516-000024-820).

An upgrade kit to HAFM 07.01.00-9 is also available, Part Number 320908-B22, for

owners of license for previous versions. This HAFM upgrade is also available on the

following HP web site:

http://h18006.www1.hp.com/storage/saninfrastructure.html