HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu - Sayfa 21

Anahtar HP 316095-B21 - StorageWorks Edge Switch 2/24 için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP 316095-B21 - StorageWorks Edge Switch 2/24 22 sayfaları. Edge switch release notes
Ayrıca HP 316095-B21 - StorageWorks Edge Switch 2/24 için: Güncelleme Kılavuzu (9 sayfalar), Manuel (41 sayfalar), Manuel (40 sayfalar), Yayın Notu (32 sayfalar), Yayın Notu (27 sayfalar), Manuel (26 sayfalar), Yayın Notu (27 sayfalar), Yayın Notu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (18 sayfalar), Talimatlar Kılavuzu (17 sayfalar), Yayın Notu (17 sayfalar), Yükseltme Talimatları (16 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar), Yayın Notu (16 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (11 sayfalar)

Ports May Accumulate Spurious Events

A port may accumulate Invalid transmission word and Bit-Error Threshold Link

Incident events when a transceiver is poorly seated resulting in a poor ground

connection.

Workaround

Reseating the optical transceiver will correct the problem.

Firmware Downloaded to the Edge Switch 2/24 Using HAFM Can

Occasionally Time Out

Firmware downloaded to the edge switch 2/24 using HAFM can occasionally time

out due to an internal task priority issue which has been resolved and will be fixed

in the next major firmware release.

Workaround

Firmware downloads can be performed via the Embedded Web Server.

Adding a Defective ISL Connection May Cause all ISLs to Segment

Between the Two Switches or Directors

Adding a defective ISL (due to defective cable, optics, or port) between edge

switches or directors may result in all the ISLs between the edge switches or

directors becoming segmented.

Workaround

Should the ISLs between two edge switches or directors become segmented as a

result of adding an ISL between them, disconnect the added ISL, allow the fabric

to be rebuilt and then troubleshoot the problematic ISL. This can be avoided by

using known good cables and performing port diagnostic tests before connecting

an ISL.

Edge Switch Release Notes

Known Issues