HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu - Sayfa 9

Anahtar HP 316095-B21 - StorageWorks Edge Switch 2/24 için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 sayfaları. Edge switch release notes
Ayrıca HP 316095-B21 - StorageWorks Edge Switch 2/24 için: Güncelleme Kılavuzu (9 sayfalar), Manuel (41 sayfalar), Manuel (40 sayfalar), Yayın Notu (32 sayfalar), Yayın Notu (27 sayfalar), Manuel (26 sayfalar), Yayın Notu (27 sayfalar), Yayın Notu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (18 sayfalar), Talimatlar Kılavuzu (17 sayfalar), Yükseltme Talimatları (16 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar), Yayın Notu (16 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (11 sayfalar)

Sayfayı Yazdır
HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu
Description
Switch Blades and Enterprise Fabric Mode: switch binding is
deactivated when Enterprise Fabric Mode is deactivated for switch
blades.
When an ethernet cable is disconnected, the ethernet event is not
sent for switch in a discovered fabric.
No SNMP traps are displayed in the event log when sent across
through a firewall.
Exception occurs when export- to-disk operation is performed on
a remote client on AIX platform.
HAFM 8.7 Fabric Log falsely reports ISLs added and removed.
Firmware load failure to a Director due to intermittent timeout.
The incorrect firmware version is displayed in fabric tree after
downgrading to firmware 7.1.3.
FL Ports do not show a destination icon and port in performance
graphs.
The persist fabric does not work properly if the connection is lost to
a non-McDATA principal switch. The persist fabric always keys off
the principal switch. Non-McDATA switches do not display in HAFM.
When a non-McDATA switch is the principal switch and the fabric is
persisted, incorrect persist fabric updates occur if connection is lost to
the principal switch.
A fenced port reports as disabled after a clearing problem and the
port is placed back online.
The user must unblock, block then unblock again to recover a port
after a fencing policy has been invoked.
Cannot enable a show route between the end devices attached to a
switch blades.
Enhancements
This section describes enhancements for HAFM 08.09.01.
4Gb Fibre Channel speed support for Director 2/140
This release now provides 4 Gb Fibre Channel speed support in the Director 2/140 when using the 4
Gb/s Intrepid 6000 QPM Blade. You can purchase the 4 Gb/s Intrepid 6000 QPM Blade (QPM
blade) through an authorized McDATA Reseller.
For information about purchasing the 4 Gb/s Intrepid 6000 QPM Blade, please contact your authorized
McDATA reseller. You can find the latest McDATA contact information by region on the McDATA web site
http://www.mcdata.com/about/contact/index.html.
For detailed information about the 4 Gb/s Intrepid 6000 QPM Blade, see the latest versions of the
Intrepid 6140 and 6064 Directors Element Manager User Manual and the E/OS Command Line Interface
User Manual, available on the McDATA web site
http://www.mcdata.com/wwwapp/resourcelibrary/jsp/navpages/indexForSearchBy.jsp?search-
FolderName=/tpub/&resourceType=Technical%20Documents&product_line_root=tpub&re-
source=tpub_search&mcdata_category=www_resource.
Problem Category
Enterprise Fabric Mode
Ethernet Event
Event Log
Export
Fabric Persistence
Install/Uninstall
Install/Uninstall
Performance
Persisted Fabric
Port Fencing
Port Fencing
Show Route/Hide Route
HA-Fabric Manager release notes
9