HP 316095-B21 - StorageWorks Edge Switch 2/24 Yayın Notu - Sayfa 13

Anahtar HP 316095-B21 - StorageWorks Edge Switch 2/24 için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP 316095-B21 - StorageWorks Edge Switch 2/24 16 sayfaları. Edge switch release notes
Ayrıca HP 316095-B21 - StorageWorks Edge Switch 2/24 için: Güncelleme Kılavuzu (9 sayfalar), Manuel (41 sayfalar), Manuel (40 sayfalar), Yayın Notu (32 sayfalar), Yayın Notu (27 sayfalar), Manuel (26 sayfalar), Yayın Notu (27 sayfalar), Yayın Notu (25 sayfalar), Kurulum Talimatları Kılavuzu (24 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (23 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (19 sayfalar), Yayın Notu (18 sayfalar), Talimatlar Kılavuzu (17 sayfalar), Yayın Notu (17 sayfalar), Yükseltme Talimatları (16 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Kurulum Talimatları Kılavuzu (16 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (17 sayfalar), Yayın Notu (11 sayfalar)

Reinstalling Feature Licenses

Feature Licenses (or keys) must be reinstalled after performing a factory reset on a

director or edge switch to regain use of the licensed features (e.g., SANtegrity

Binding).

This section describes the known issues related to HAFM software.

Some IP Addresses must be Avoided

When you select IP addresses for edge switches and directors, and also if you

select a static IP address for the HAFM server, do not use IP addresses in the

following range:

Show Routes "Select a Source Node" Panel may be Blank

If you first logon to HAFM and immediately go to Fabric View and click

Topology View > Show Routes, the Select a Source Node panel may be blank.

Workaround

Going to a different view first, e.g., Product View or Hardware View for a

director or edge switch, will prevent this from occurring.

Director and Edge Switch may be Displayed With WWN even if Display

Option "Product Name" is Selected

In the Fabric View, the directors and edge switches may have their WWN

displayed as identifier even if Product Name is selected.

Workaround

Changing the Display Option to another setting and back to Product Name will

cause the Product Name of directors and edge switches to display correctly.

HA-Fabric Manager Release Notes

192.168.0.0 through 192.168.0.255—This subnet is used internally to the

HAFM server. Using an IP address in this range causes the call-home feature

to function incorrectly.

Known Issues