HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch Kurulum Kılavuzu - Sayfa 8
Anahtar HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch 28 sayfaları. Fabric clustering system 24-port 4x fabric copper switch installation guide, march 2005
Ayrıca HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch için: Beyaz Kitap (13 sayfalar), Uygulama Kılavuzu (9 sayfalar)
Sayfayı Yazdır
HP-UX Integrity Installation Overview & Planning
HP Fabric Clustering System Installation Prerequisites
The latest switch firmware and is available online at: http://support.hp.com
1. Select Software and Driver downloads.
2. Enter your product name.
3. Click the double arrow.
Refer to the section "Configuration, Image, and Log Files" section of the HP Fabric Clustering System
HP-UX Administrator's Guide.
•
Confirm that the HP Fabric adapter and software is supported on the HP server and IO slot chosen; see
HP Fabric Clustering System Support Matrix, available at http://www.docs.hp.com in the Networking &
Communications section.
•
Each AB286A Host Channel Adapter card requires 512 MB host memory in supported HP 9000 or
Integrity servers.
•
Each AB345A Host Channel Adapter card requires 1 GB host memory in supported Integrity servers.
•
To use the Internet Protocol over InfiniBand (IPoIB) protocol, see "Internet Protocol over InfiniBand
(IPoIB)" on page 17 (optional).
•
The installed version of IP Filter must be higher than "B9901AA A.03.05.06 HP IPFilter 3.5alpha5".
•
Check the cluster configuration plan for information on where to install adapters, switches, and cable
guides, and where cables are to be routed.
For more information about the configuration plan, please refer to the Planning the Cluster section of the
HP Fabric Clustering System HP-UX Administrator's Guide.
•
Check your server's documentation to see if additional tools may be required for component installation.
•
For specific instructions on adapter installation, see system-specific documentation on "installing
networking adapters" for each server that adapters will be installed into.
•
On-Line Addition and Replacement (OL*) of HP Fabric adapters is supported on HP Fabric Clustering
System version B.11.23.02 or newer with a couple of limitations; see "On-Line Addition and Replacement
Operations (OL*)" on page 10.
•
Confirm that there are cables of proper length to make connections in the fabric (adapter to adapter,
adapter to switch, or switch to switch).
•
Confirm that HP Fabric Clustering System software suite software media is available. It is included on
CD or available on the Web through http://www.software.hp.com.
•
Confirm that HP-UX super-user privileges are available; they are necessary to complete the installation.
•
Confirm that the /usr/bin, /usr/sbin, /sbin, and /opt/rdma/bin directories are in your PATH by
logging in as root and using the echo $PATH command.
•
Confirm that the HP-UX operating system is the correct version, HP-UX 11i v2. Use the uname -a
command to determine the HP-UX version of your system. For more information about the required
operating system versions, see HP PCI-X 2-port 4X Fabric Adapter Release Notes.
Information Available on the Host Channel Adapter
If you are collecting information from the adapter before installation for inventory purposes, there is a GUID
number on the card. This number can also be obtained through the HP-UX Fabric Clustering System utilities,
but if recording information for inventory, include the GUID number as well, as it is unique for each adapter.
The GUID will have a format such as:
8
00:11:85:FF:FF:D2:0A:01
00:0D:9D:FF:FF:FE:1A:2C
or
.
Chapter 1