HP 5120 SI Series Kurulum Kılavuzu - Sayfa 7

Anahtar HP 5120 SI Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP 5120 SI Series 48 sayfaları. 5120 si switch series
Ayrıca HP 5120 SI Series için: Şartname (33 sayfalar)

HP 5120 SI Series Kurulum Kılavuzu

EMI

All electromagnetic interference (EMI) sources, from outside or inside of the switch and application
system, adversely affect the switch in the following ways:
A conduction pattern of capacitance coupling.
Inductance coupling.
Electromagnetic wave radiation.
Common impedance (including the grounding system) coupling.
To prevent EMI, perform the following tasks:
If AC power is used, use a single-phase three-wire power receptacle with protection earth (PE)
to filter interference from the power grid.
Keep the switch far away from radio transmitting stations, radar stations, and high-frequency
devices.
Use electromagnetic shielding, for example, shielded interface cables, when necessary.

Laser safety

The switch is Class 1 laser device.
WARNING!
Do not stare into any fiber port when the switch has power. The laser light emitted from the optical
fiber might hurt your eyes.

Installation tools

Flathead screwdriver
Phillips screwdriver
Needle-nose pliers
Wire-stripping pliers
Diagonal pliers
ESD wrist strap
Blow dryer
All these installation tools are user supplied.
3