HP 5120-24G EI TAA Veri Sayfası - Sayfa 4

Anahtar HP 5120-24G EI TAA için çevrimiçi göz atın veya pdf Veri Sayfası indirin. HP 5120-24G EI TAA 17 sayfaları. Hp 5120 ei switch series
Ayrıca HP 5120-24G EI TAA için: Yapılandırma Kılavuzu (39 sayfalar)

Sayfayı Yazdır

Data sheet | HP 5120 EI Switch Series

• Smart link

allows 50 ms failover between links

• Spanning Tree/MSTP, RSTP

provides redundant links while preventing network loops

• Rapid Ring Protection Protocol (RRPP)

connects multiple switches in a high-performance ring using standard Ethernet technology;

traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and

applications

• Intelligent Resilient Framework (IRF)

creates virtual resilient switching fabrics, where two or more switches perform as a

single L2 switch and L3 router; switches do not have to be co-located and can be part of

a disaster-recovery system; servers or switches can be attached using standard LACP for

automatic load balancing and high availability; can eliminate the need for complex protocols

like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying

network operation

Layer 2 switching

• 16K MAC address table

provides access to many Layer 2 devices

• VLAN support and tagging

supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs

• GARP VLAN Registration Protocol

allows automatic learning and dynamic assignment of VLANs

• IEEE 802.1ad QinQ and selective QinQ

increase the scalability of an Ethernet network by providing a hierarchical structure; connect

multiple LANs on a high-speed campus or metro network

• 10GbE port aggregation

allows grouping of ports to increase overall data throughput to a remote device

• Internet Group Management Protocol (IGMP) and Multicast Listener

Discovery (MLD) protocol snooping

controls and manages the flooding of multicast packets in a Layer 2 network

• Per-VLAN Spanning Tree Plus (PVST+)

allows each VLAN to build a separate spanning tree to improve link bandwidth usage in

network environments with multiple VLANs

Layer 3 services

• Address Resolution Protocol (ARP)

determines the MAC address of another IP host in the same subnet; supports static ARPs;

gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP

operation between subnets or when subnets are separated by a Layer 2 network

• Dynamic Host Configuration Protocol (DHCP)

simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP

operation across subnets

• Loopback interface address

defines an address that can always be reachable, improving diagnostic capability

• User Datagram Protocol (UDP) helper function

allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet

broadcast addresses and prevents server spoofing for UDP services such as DHCP

• Route maps

provide more control during route redistribution; allow filtering and altering of route metrics