HP ProCurve 2610-48-PWR Teknik Özellikler - Sayfa 7
Anahtar HP ProCurve 2610-48-PWR için çevrimiçi göz atın veya pdf Teknik Özellikler indirin. HP ProCurve 2610-48-PWR 10 sayfaları. Procurve switch 2610 series
Sayfayı Yazdır
HP ProCurve Switch 2610 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight
Memory and processor
Processor
Mounting
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching capacity
MAC address table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Maximum heat dissipation
Voltage
Current
Power consumption
Frequency
Notes
HP ProCurve Switch 2610-48-PWR (J9089A)
48 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX); Media Type: Auto-MDIX; Duplex: half or
full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
13.5(d) x 17.4(w) x 1.73(h) in. (34.29 x 44.2 x 4.39 cm) (1U height)
16.7 lb. (7.58 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size:
2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
< 6.2 µs (LIFO)
< 4.4 µs (LIFO)
up to 13.0 million pps
17.6 Gbps
8000 entries
32ºF to 122ºF (0ºC to 50ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 63.6 dB, Pressure: 56.6 dB; DIN 45635T.19 per ISO 7779
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr: 410; combined
switch + max. PoE devices at 15.4 W: 2281 BTU/hr)
100-127 / 200-240 VAC
7.0 / 3.5 A
96 W
50 / 60 Hz
Maximum power rating is the worst-case theoretical maximum power
number with fully loaded PoE, 100% traffic, all ports plugged in, and
all modules populated.
Power consumption: 96 W without PoE; 590 W with PoE.
HP ProCurve Switch 2610-24/12PWR (J9086A)
24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX); Media Type: Auto-MDIX; Duplex: half or
full
1 RJ-45 serial console port
2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height)
7.5 lb. (3.4 kg)
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size:
1 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
< 4.1 µs
< 2.9 µs
up to 9.5 million pps
12.8 Gbps
8000 entries
32ºF to 122ºF (0ºC to 50ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 90% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 46 dB, Pressure: 38.4 dB; DIN 45635T.19 per ISO 7779
181 BTU/hr (190.96 kJ/hr), (switch-only BTU/hr: 181; combined
switch + max. PoE devices at 15.4 W: 827 BTU/hr)
100-127 / 200-240 VAC
3.3 / 1.7 A
62 W
50 / 60 Hz
Maximum power rating is the worst-case theoretical maximum power
number with fully loaded PoE, 100% traffic, all ports plugged in, and
all modules populated.
Power consumption: 62 W without PoE; 189 W with PoE.
7