aquatechnik BCB 110 Kullanım Kılavuzu - Sayfa 10

Araçlar aquatechnik BCB 110 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. aquatechnik BCB 110 12 sayfaları. Coupling tool

POWER SUPPLY

BATTERIES AND BATTERY RECHARGER

Battery, code 50423

18V - 4.0 Ah

Litium

•

Remove the battery from the Coupling Tool by pressing the

blue button on the back of the handle and pushing down.

•

The time needed for the recharging is 1½ - 2 hours.

•

The battery shows as following:

green flashing light: the battery is charging

green steady light: battery charging is completed

red flashing light: no contact between battery and

charger or charger failure

red steady light: overheating of the battery or of the charger. In this case, wait for the

cooling time and try charging again. At the end of the charging cycle (green light

on), disconnect the battery from the charger.

•

The temperature increasing of the battery during recharging is normal. The battery

overheating can temporarily block the recharging process (red steady light). Wait for the

cooling times and repeat the charging.

•

To preserve the endurance and the good performing of the battery, we suggest to

discharge completely before the next recharging. Perform partial battery recharging may

cause a reduction of battery life

•

The charger is equipped with a cooling fan: do not cover the ventilation area under any

circumstances.

Battery recharger, code. 50434

230 V, for battery 50423

FIG. 10