HP ProCurve J8766A Kurulum Kılavuzu - Sayfa 15

Anahtar HP ProCurve J8766A için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HP ProCurve J8766A 48 sayfaları. Hp procurve switch vl modules
Ayrıca HP ProCurve J8766A için: Önce Beni Oku (4 sayfalar), Hızlı Referans Kılavuzu (44 sayfalar)

Sayfayı Yazdır

The module is fully inserted when

the module bulkhead is contacting,

or very close to contacting

the face of the switch.

N o t e

W A R N I N G

Figure 5. Tighten module retaining screws

Installing or Removing the Mini-GBICs

Hot swapping mini-GBICs is supported. You can install or remove a mini-GBIC

with the switch powered on, a reset will not occur.

You can install or remove the mini-GBIC from the mini-GBIC vl Module, or the

Gig-T/SFP vl Module, without having to power off the switch. Use only

ProCurve mini-GBICs with the letter "B" (or greater) at the end of the product

number (for example, J4858B or J4860C).

The ProCurve fiber optic mini-GBICs are Class 1 laser devices. Avoid

direct eye exposure to the beam coming from the transmit port.

ProCurve Switch vl Modules

Then tighten the retaining screws

on the module until they are secure,

but do not overtighten them.

Installing the Modules