HP StorageWorks 2/140 - Director Switch Yayın Notu - Sayfa 13

Anahtar HP StorageWorks 2/140 - Director Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP StorageWorks 2/140 - Director Switch 13 sayfaları. Director power cord advisory instruction
Ayrıca HP StorageWorks 2/140 - Director Switch için: Yayın Notu (27 sayfalar), Yayın Notu (24 sayfalar), Kurulum Talimatları Kılavuzu (22 sayfalar), Yayın Notu (20 sayfalar), Yayın Notu (11 sayfalar), Yayın Notu (10 sayfalar), Talimatlar (1 sayfalar)

Sayfayı Yazdır
HP StorageWorks 2/140 - Director Switch Yayın Notu
Workaround
On a stable system after the diald software has run for a few cycles the discovery
information will remain unchanged. In order to minimize the opportunity for this
conflict to occur with any programs using ioscan, you can modify the polling
period to a larger value. To do this, the entry
"DIAL_DISCOVERY_DELAY"
in the file
/opt/sanmgr/hostagent/config/dial.cfg
should be changed. The polling period value should be specified in minutes, e.g. a
value of 60 would result in a 1 hour discovery poll cycle. The polling period value
should be modified considering the time and frequency that ioscans are being run,
in order to avoid diald and ioscan being executed simultaneously.
This issue will be corrected in the next release of director and edge switch
firmware.
Director Release Notes
Known Issues
13