HP StorageWorks 2/16V - SAN Switch Yayın Notu - Sayfa 16

Anahtar HP StorageWorks 2/16V - SAN Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP StorageWorks 2/16V - SAN Switch 48 sayfaları. Hp storageworks san switch rack mount kit installation instructions (a7511-90904, june 2009)
Ayrıca HP StorageWorks 2/16V - SAN Switch için: Güncelleme Kılavuzu (9 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Table
4,
Table
Table 4
Information Specific to SAN Switch 4/32
SAN Switch 4/32
SWL and LWL SFP
modules release
mechanism
LED, system status
LED, system power
16
Advanced Web Tools updates
5, and
Table 6
list important information for switches running Fabric OS 4.4.0b.
Description
The SAN Switch 4/32 uses an octal-style SFP cage that places SFPs in
close proximity. As a result of the physical space limitation between the
SFPs, HP requires the use of approved SFP modules only.
Using an approved SFP module eliminates issues associated with the fit and
removal of the module. Specifically, SFPs with wide bail latch mechanisms
that are not flush with the body of the SFP or SFPs with "push-tab" removal
mechanisms might prevent the proper insertion or removal of the SFP
module.
At the time of release, the following SFPs were certified for use with the
SAN Switch 4/32:
•
HP StorageWorks 4Gb SW SnglePK SFP Transceiver, A7446A
•
Short wavelength SFP, A6515A* or 300834-B21**
•
Long wavelength SFP, 10 km, A6516A* or 300835-B21**
•
Long wavelength SFP, 35 km, 300836-B21**
* Premerger HP part number
** Premerger Compaq part number
The system status LED blink behavior in the SAN Switch 4/32 is different
from that of legacy HP StorageWorks switches. Legacy products blink
system status with the pattern amber, off, amber, off. The SAN Switch
4/32 blinks with the pattern amber, green, amber, green.
The system power LED behaves differently in the SAN Switch 4/32 than in
SAN Switch 2/8V and SAN Switch 2/16V. In the latter switches, it is solid
amber when a power supply FRU fails. In the SAN Switch 4/32, the system
power LED remains green, and the system status LED blinks, indicating an
error.