HP StorageWorks 2/32 - SAN Switch Yayın Notu - Sayfa 7

Anahtar HP StorageWorks 2/32 - SAN Switch için çevrimiçi göz atın veya pdf Yayın Notu indirin. HP StorageWorks 2/32 - SAN Switch 32 sayfaları. Fabric manager version 3.0.x release notes
Ayrıca HP StorageWorks 2/32 - SAN Switch için: Kurulum Talimatları Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Ürün Yazılımı Sürüm Notları (14 sayfalar), Yayın Notu (48 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar), Yayın Notu (14 sayfalar), Yayın Notu (4 sayfalar)

HP StorageWorks 2/32 - SAN Switch Yayın Notu
Documentation Updates
The hp StorageWorks SAN Switch 2/32 Version 4.0.x Installation Guide supplied with
your switch lists the HP System/e Rail Kit as an option. This is not always true.
When ordering the SAN Switch 2/32, you may receive an HP System/e Rail Kit in
addition to standard components with your order. Use the HP System/e components
for mounting your switch in an HP System/e Rack, following the instructions
provided in the SAN Switch 2/32 Installation Guide.
NOTE: The hardware that makes up the HP System/e Rail Kit are non-saleable components.
You can identify this hardware per the following HP part numbers:
A7340-87901 (Rail, qty 2)
A7340-87902 (hardware, qty 1)

SAN Switch 2/32 Firmware Version 4.0.2b Updates

The following lists enhancements to Fabric OS Version 4.0.2b:
IMPORTANT: Fabric OS Version 4.0.2b firmware works with the hp StorageWorks SAN Switch
2/32 and the hp StorageWorks SAN Core Switch 2/64. This firmware will not work if loaded onto
the hp StorageWorks SAN Switch 1 Gb models, or the hp StorageWorks SAN Switch 2/8 EL,
2/16 or 2/16 EL models.
Firmware Download Functionality
This section summarizes changes to the firmware download functionality. For more
detailed information refer to the hp StorageWorks Fabric OS Version 3.0.x/4.0.x
Reference Guide.
firmwaredownload
Use this admin level command to download new firmware version to a switch.
firmwarecommit
Use this admin level command to commit a new firmware version to both partitions of
flash memory. The SAN Switch 2/32 maintains a primary and secondary partition for
firmware. The firmwaredownload command writes to the secondary partition
only and automatically commits the firmware at the end of the download process,
following a switch reboot.
If you wish to override the auto-commit setting, you must use the "-sn" option on the
switch. See the help page for more details. HP recommends maintaining the same
firmware version on each partition of a switch or CP card.
SAN switch 2/32, version 4.0.2b release notes
Documentation Updates
7