HP StorageWorks 7110 - Virtual Array Manuel Kullanım - Sayfa 7

Anahtar HP StorageWorks 7110 - Virtual Array için çevrimiçi göz atın veya pdf Manuel Kullanım indirin. HP StorageWorks 7110 - Virtual Array 34 sayfaları. Private loop (hubs/direct connect)
Ayrıca HP StorageWorks 7110 - Virtual Array için: Yükseltme Talimatları (12 sayfalar), Talimatlar (4 sayfalar), Manuel (4 sayfalar), Manuel (4 sayfalar), Kurulum Talimatları (2 sayfalar), Manuel (2 sayfalar), Manuel (1 sayfalar), Manuel (1 sayfalar)

Sayfayı Yazdır
HP StorageWorks 7110 - Virtual Array Manuel Kullanım
DESCRIBE
Displays configuration information for an array.
Syntax
describe [-c [FruLocation] | -d [FruLocation] | -e [FruLocation] | -f | -l [LUN] | -s | -m | -?]
Description
This command displays configuration information for the selected array. Use the arrayindex
command to select the array.
Options
This command supports the following options:
-c FruLocation
Display controller information, or display information for the controller
identified by FruLocation.
-d FruLocation
Display disk information, or display information for the disk identified by
FruLocation.
-e FruLocation
Display enclosure information, or display information for the enclosure
identified by FruLocation.
-f
Display a summary of all elements in the array.
-l LUN
Display the current LUN information, or display information for the LUN
identified by LUN.
-m
Display the missing disks (use -v for verbose mode).
-s
Display miscellaneous subsystem settings.
-?
Display expanded usage message.
Examples
To display information for the array controllers:
VADIAG> describe -c
To display information for disk 2 in the main enclosure:
VADIAG> describe -d m/d2
DESCRIBE
7