HP StorageWorks MSA 1000 Donanım Kurulumu - Sayfa 4
Anahtar HP StorageWorks MSA 1000 için çevrimiçi göz atın veya pdf Donanım Kurulumu indirin. HP StorageWorks MSA 1000 6 sayfaları. Modular san array 1000 specific for tru64 unix and openvms only
Ayrıca HP StorageWorks MSA 1000 için: Yayın Notu (5 sayfalar), Değiştirme Talimatları (4 sayfalar), Quickspecs (17 sayfalar)
HP StorageWorks Modular Smart Array 1000 Small Business SAN Kit
system and the disks itself. So, he is launching the SANsurfer Express software. As
soon as he is done, we will click next to move on. If you don't want this screen to show
up every time you start the service, go ahead and uncheck and say "close". If you take a
look at this screen, and you can see a map of what is actually in your configuration. You
see the MSA1000, you see the switch and you see the controller.
Now, we have launched SANsurfer Express, let's take a look around here and see
some of things you within the software itself. Looking across the top at logical disks
operations, several things you can do here. You can create a new logical disk. You can
assign a logical disk to a server. You can expand or grow the logical disk. You can
shrink the logical disk or you can even delete the logic disk. Moving on to advance
operations, I can create and manage the partition. I can refresh my server list or I can
refresh the subsystem list. Taking it one step further, looking at the HBA and switch
management, I can set the server agent password. I can update the bios on my HBAs. I
can update the HBA driver. I can get to the switch properties. I can set the switch admin
password. I can set the switch IP address. I can also update the switch firmware. I can set
the switch symbolic name and or the domain ID. The one thing that may come in handy
for some folks is that I also have a help button. If I have any questions about what is
going on within SANsurfer Express, I can go to the help button and look for an answer.
Now, taking it down to the icons, the first icon is a one click where I can create a
new logical disc and it is basically a wizard. I can assign a logical disk to a server. I can
expand my logical disk. I can delete the logical disk. I can create and manage the
partition. Again, I can refresh the server list. I can refresh the subsystem list and take a
look at my application versions and provider list.
Now, let's go down and take a look at the storage subsystem. Looking at the
MSA1000, I see the serial number for the system itself. I know that the system is on line.
The system is healthy and I have masking capabilities. I also notice that it tells me the
capacity that is installed within my MSA1000 and I can take a look at some subsystem
details. Quickly, some of the things that I can see here, again, is controllers. I can have
two maximum. It says only one I present. I see my stripe size, the number of drives that
I have installed, and my rebuild priority. Now, if I take a look down here, I can actually
see the location of my hard drives. I see the identifier, which is my serial number. It tells
Hardware and Software Demonstration
4