HP V1910 Başlangıç Kılavuzu - Sayfa 37

Anahtar HP V1910 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. HP V1910 44 sayfaları.

Click Properties in the HyperTerminal window to enter the Switch Properties dialog box. Click the

Step5

Settings tab, set the emulation to VT100, and then click OK.

Figure 33 Set terminal emulation in Switch Properties dialog box

Powering on the switch

Before powering on the switch, verify that:



The power cord is properly connected.

The power supply voltage meets the requirement of the switch.



The console cable is properly connected; the terminal or PC used for configuration has been



started; and the configuration parameters have been set.

Powering on the switch

The V1910 switches have the same Boot ROM display style. This document uses the Boot ROM output

information on the HP V1910-24G Switch JE006A as an example:

Starting......

************************************************************************

HP V1910-24G Switch JE006A BOOTROM, Version 135