HP XP20000/XP24000 Yapılandırma Kılavuzu - Sayfa 8

Anahtar HP XP20000/XP24000 için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. HP XP20000/XP24000 42 sayfaları. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Ayrıca HP XP20000/XP24000 için: Yayın Notu (13 sayfalar), Entegrasyon Kılavuzu (29 sayfalar), Yayın Notu (4 sayfalar), Yönetici El Kitabı (50 sayfalar), Yapılandırma Kılavuzu (40 sayfalar), Yapılandırma Kılavuzu (40 sayfalar), Yapılandırma Kılavuzu (36 sayfalar), Yapılandırma Kılavuzu (36 sayfalar), Yapılandırma Kılavuzu (30 sayfalar), Yapılandırma Kılavuzu (36 sayfalar), Yayın Notu (5 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (46 sayfalar), Referans Kılavuzu (46 sayfalar), Yapılandırma Kılavuzu (40 sayfalar), Yapılandırma Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (38 sayfalar), Yapılandırma Kılavuzu (34 sayfalar), Yapılandırma Kılavuzu (30 sayfalar), Yapılandırma Kılavuzu (30 sayfalar)

Fibre Channel Adapters (FCAs): Install FCAs and all utilities and drivers. Refer to the adapter doc-

umentation for installation details.

HP StorageWorks XP Remote Web Console, HP StorageWorks XP Command View Advanced

Edition Software or HP StorageWorks XP Command View with LUN management feature for

configuring disk array ports and paths.

HP StorageWorks XP Array Manager.

Check with your HP representative for other XP software available for your system.

Fibre Channel interface

The XP family of disk arrays and the SVS 200 support these Fibre Channel elements:

Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps

Short-wave non-OFC (open fiber control) optical interface

Multimode optical cables with SC or LC connectors

Public or private arbitrated loop (FC-AL) or direct fabric attach

Fibre Channel switches

Even though the interface is Fibre Channel, this guide uses the term "SCSI disk" because disk array

devices are defined to the host as SCSI disks.

The XP family of disk arrays and the SVS 200 support these device emulation types:

OPEN-x devices: OPEN-x logical units represent disk devices. Except for OPEN-V, these devices

are based on fixed sizes. OPEN-V is a user-defined size based on a CVS device. Supported

emulations include OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, and OPEN-V devices.

LUSE devices (OPEN-x*n): Logical Unit Size Expansion (LUSE) devices combine 2 to 36 OPEN-x

devices to create expanded LDEVs larger than standard OPEN-x disk devices. For example, an

OPEN-x LUSE volume created from ten OPEN-x volumes is designated as OPEN-x*10.

CVS devices (OPEN-x CVS): Volume Size Configuration (VSC) defines custom volumes (CVS) that

are smaller than normal fixed-sized logical disk devices (volumes). (OPEN-V is a CVS-based custom

disk size that you determine. OPEN-L does not support CVS.) Although OPEN-V is a CVS-based

device, the product name in the SCSI inquiry string is OPEN-V opposed to the fixed size OPEN-

[389E] devices that appear as OPEN-x-CVS.

LUSE (expanded) CVS devices (OPEN-x*n CVS): LUSE CVS combines CVS devices to create an

expanded device. This is done by first creating CVS custom-sized devices and then using LUSE to

combine from 2 to 36 CVS devices. For example, if three OPEN-9 CVS volumes are combined to

create an expanded device, this device is designated as OPEN-9*3-CVS. OPEN-V devices are

designated as OPEN-V*n (without CVS).

NOTE:

For the SVS 200, and the XP24000/XP20000/XP12000/XP10000 when connected to external

storage devices, HP recommends using OPEN-V as the emulation the array makes visible to the host.

This allows configuration of external storage LDEVs without losing data. Using any other emulation

may cause data loss in the external storage LUNs. For new deployments, OPEN-V should be chosen

because some features (such as HP StorageWorks XP Snapshot Software or HP StorageWorks XP

Continuous Access Journal Software) are only supported with OPEN-V.

Installing and configuring Sun Solaris for the XP disk array