Panasonic WVBP554 - CCTV B/W CAMERA Kullanım Talimatları Kılavuzu - Sayfa 9
Dijital Kamera Panasonic WVBP554 - CCTV B/W CAMERA için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic WVBP554 - CCTV B/W CAMERA 36 sayfaları. Super dynamic dsp b/w cameras
Ayrıca Panasonic WVBP554 - CCTV B/W CAMERA için: Kullanım Talimatları Kılavuzu (36 sayfalar), Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
CONNECTIONS
A. WV-BP550 (120V AC 60Hz)
1. Connect the AC power cord (supplied as standard
accessory) to the power cord socket of the cam-
era.
2. Connect the AC power cord to an electrical outlet
of 120V AC 60 Hz.
Notes:
• Connect the power cord firmly.
• The power cord should be long enough for pan-
ning and tilting.
If the cable is too short, the power cord plug may
pulled off the camera when the camera pans or
tilts.
B. WV-BP554 (12V DC/24V AC)
The WV-BP554 has an AC/DC compatible input termi-
nal. The 12V DC or 24V AC power supply cord can be
connected to this terminal. The camera detects the
power source automatically.
1. 12 V DC Power Supply
Connect the power cord to
the AC/DC compatible
input terminal on the rear
panel of the camera.
DC 12V
AC 24V
IN
IN
1
2
12 VDC
GND
(10.5 V - 16 V)
-7-
Resistance of copper wire [at 20°C (68°F)]
Copper wire
#24
size (AWG)
(0.22mm
)
(0.33mm
2
Resistance
0.078
/m
Resistance
0.026
/ft
• Calculation method of maximum cable length
between camera and power supply.
10.5V DC ≤ V
(R x 0.42 x L) ≤ 16V DC
A
L : Cable length (meter)
R : Resistance of copper wire ( /meter)
V
: DC output voltage of power supply unit
A
V
12
A
L standard =
0.42 x R
V
16
A
L minimum =
0.42 x R
V
10.5
A
L maximum =
0.42 x R
#22
#20
#18
)
(0.52mm
)
(0.83mm
)
2
2
2
0.050
0.030
0.018
0.017
0.010
0.006
(meters)
(meters)
(meters)