Diamond Systems JMM-5312-ADRH Kullanıcı Kılavuzu - Sayfa 12
Güç Kaynağı Diamond Systems JMM-5312-ADRH için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Diamond Systems JMM-5312-ADRH 18 sayfaları. Advanced technology 218w dc/dc power supply pc/104-plus module
Sayfayı Yazdır6. CONNECTOR PINOUT AND PIN DESCRIPTION
6.1
Primary Power Input Connector (J7)
A four position screw terminal block is used to provide main input power to the board. This terminal block is located
along the left side of the board. The connector supports 16A total on the two input terminals and 16A total on the
two ground terminals.
Connector Part Number: 1827884
Mating Part Number: 1827729
6.2
Secondary Power Input Connector (J8)
Power can also be provided from a battery source through the connector J8. A 4-position screw terminal block is
used to provide backup / battery input power to the board. The minus terminal is connected to the power supply
common. This terminal block is located along the left side of the board. The connector supports 8A on each
terminal.
Connector Part Number: 1827884
Mating Part Number: 1827729
JMM-5000 User Manual Rev B.01
J7
Vin 7-34VDC
1
Vin 7-34VDC
2
GND
3
GND
4
J8
Vin 7-34VDC
1
Vin 7-34VDC
2
GND
3
GND
4
www.diamondsystems.com
Page 12