Panasonic PLC-XP40 Kullanıcı El Kitabı - Sayfa 33
Projektör Panasonic PLC-XP40 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Panasonic PLC-XP40 44 sayfaları. Multimedia projector
Sayfayı Yazdır
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
IMAGE ADJUST Menu icon.
Press POINT DOWN button to move a red frame pointer to item
2
that you want to adjust and then press SELECT button. Level of
each item is displayed. Adjust each level by pressing POINT
LEFT/RIGHT button(s).
Contrast
Press POINT LEFT button to decrease contrast, and POINT RIGHT
button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust image darker, and POINT
RIGHT button to adjust brighter. (From 0 to 63.)
Color
Press POINT LEFT button to lighten color, and POINT RIGHT button
to deeper color. (From 0 to 63.)
Tint
Press POINT LEFT button or POINT RIGHT button to obtain proper
color. (From 0 to 63.)
White balance (Red)
Press POINT LEFT button to lighten red tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT button to lighten green tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Blue)
Press POINT LEFT button to lighten blue tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften image, and POINT RIGHT
button to sharpen image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 15.)
Noise reduction
Press POINT LEFT/RIGHT button(s) to change noise reduction mode.
Dialog box display is changed to "On to reduce noise (rough parts) of
image. Press POINT LEFT/RIGHT button(s) again, to change noise
reduction mode to off.
Progressive scan
Press POINT LEFT/RIGHT button(s) to change progressive scan
mode. Dialog box display is changed to "Off" and progressive scan
mode to off. Press POINT LEFT/RIGHT button(s) again, progressive
scan mode to on.
IMAGE LEVEL ADJUSTMENT
IMAGE ADJUST MENU
Move a red frame pointer to
item to be selected and then
press SELECT button.
Press POINT LEFT/RIGHT buttons
to adjust value.
Press SELECT button at this icon to
display other items.
Press SELECT button at this icon to
display previous items.
Press POINT LEFT/RIGHT buttons
to adjust value.
Press SELECT button at this icon to
store value.
NOTE :
Tint cannot be adjusted when video system is PAL,
SECAM, PAL-M or PAL-N.
Noise Reduction cannot be operated when video
signal types and systems as follow.
Composite video signal (SECAM, NTSC4.43,
PAL-M and PAL-N systems).
S-video signal (SECAM, PAL-M and PAL-N
systems).
Component video signal.
Progressive cannot be operated when "480p",
"575p", "720p", "1035i" or "1080i" is selected on AV
SYSTEM MENU (P31).
VIDEO INPUT
IMAGE ADJUST
Menu icon
33