Panasonic PT-65WX50 Kullanım Talimatları Kılavuzu - Sayfa 5
Projektör Panasonic PT-65WX50 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic PT-65WX50 34 sayfaları. Color video projection system
Ayrıca Panasonic PT-65WX50 için: Kullanım Talimatları Kılavuzu (37 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar)
Sayfayı Yazdır
INSTALLA
TION
Installation
Television
Location
This unit can be used as part of an entertainment center. Consult your dealer for available
options.
[]
Avoid excessive sunlight or bright lights, including reflections.
{3
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
{3
Fluorescent lighting may reduce remote control transmitting
range.
[]
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components. For best results:
[]
Use 75-ohm coaxial shielded cables.
{3
Use appropriate
input and output connectors that match your component connectors.
[]
Avoid long cables to minimize interference,
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WiDE SLOT OF AC OUTLET AND FULLY INSERT.
DO NOT
Polarized Plug
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Cable / Antenna
Connections
For proper
reception,
either a cable or antenna
connection
is required.
Cable Connection
Incoming
Cable from
Cable Company
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP
_,
menu under Prog Chart (Program Channels).
_
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibifity
?5OhmVHF/UHF
on backof 13/
requirements.
Antenna Connection
For proper reception of VHF/UHF channels,an external antenna is required.For
best reception, an outdoor antenna is recommended.
Connect home antenna to back of television.
Select TV
mode and ANT1 in the SET UP Menu under Prog Chan.
-_ . _ _ Cable Pr_._t
Cable Mode is preset at the factory.
Antenna users must changeto TV Mode and
i ANT1 in the Set Up Menu under Prog Chan.
Incoming
Cable front
Home Antenna
[]