Panasonic PT-AE1000 Kullanım Talimatları Kılavuzu - Sayfa 17
Projektör Panasonic PT-AE1000 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic PT-AE1000 28 sayfaları. Panasonic lcd projector operating instructions
Ayrıca Panasonic PT-AE1000 için: Kullanım Talimatları Kılavuzu (28 sayfalar)
Sayfayı Yazdır
PICTURE Menu
WAVEFORM MONITOR
.
BRIGHTNESS B
NOTE:
• APPlying noise reduction may affect image quality.
• Setting range: -16 to +16
■ COLOUR MANAGEMENT
You can manage your own defined colour settings.
See "Setting your own colour profile" on page 26.
■ NR (Noise Reduction)
You can switch the automatic noise reduction
system on/off. Press < ► to select the required
setting.
* ON:
Automatic noise reduction
• OFF:
No noise reduction
Press A V to move to the required waveform
style.
Press ENTER to select.
•
The WAVEFORM MONITOR will be
displayed.
Adjust the WAVEFORM MONITOR.
• See "Adjusting the waveform of the input
signal" on page 24.
1
.
2
.
3.
SHARPNESS
ADVANCED MENU
You can adjust the sharpness of the projected image.
*"ess
More
sharp
PWf sharp
COLOUR TEMPERATURE
You can adjust the white balance of the projected
image.
Less
reddish
Less
£
bluish P
Setting range: -6 to +6
DYNAMIC IRIS
You can switch automatic adjustment of the lamp and
the lens iris on/off.
* ON.
Automatic adjustment
• OFF.
No adjustment
You can monitor the luminance level of the input signal
is in the recommended range by displaying it in
waveform. If the waveform is not in the range, adjust it
for the best quality. See "Adjusting the waveform of the
input signal" on page 24.
From the
ADVANCED MENU,
you can perform more
detailed image adjustment manually.
■ GAMMA
You can adjust linear intensity at 3 levels. Press
► to increase/decrease 1 point.
_
GAMMA HIGH
GAMMA MID
0
GAMMA LOW
q
' Setting range:-8 to+8
| CONTRAST
You can adjust the amount of contrast in RGB
colours individually. Press ◄ ► to
increase/decrease 1 point.
Default setting
RGB
CONTRAST R
0
CONTRAST G
0
CONTRAST B
]
0
Setting range: -32 to +32
| BRIGHTNESS
You can adjust the brightness in RGB colours
individually, Press ◄ ► to increase/decrease
1
point.
RGB
Default setting
BRIGHTNESS R
0
BRIGHTNESS G
32
-
English
mpeg NR
You can switch the automatic noise reduction
system for MPEG format images on/off. The
system minimises block noise and mosquito noise
to eliminate jagged edges, providing an overall
smoother image. Press ◄ ► to select the required
setting.
• ON:
Active
• OFF:
Deactive
NOTE:
• MPEG NR
is for MPEG images only.
• MPEG NR
is not available with
PC
and
HDMI
(VGA60)
signals.
■ CINEMA REALITY
You can switch the automatic image synchronizer
on/off for 24 frames a second images, such as
movies. Press ◄ ► to select the required setting.
* ON:
Active
• OFF:
Deactive
NOTE:
• CINEMA REALITY is available with interlace
signals only.
• If the
CINEMA REALITY
is different from the
required setting of the image, select
OFF,
■ TV-SYSTEM
When the video signal is changed, the setting switches
automatically.
You can switch the setting manually to match the video
data. Press < ► to cycle through the options.
AUTO
1 «*• r
i
SECAM
PAL-N
PAL-M
1 i
NTSC
♦
NTSC 4.43
]
1
PAL
MEMORY SAVE
You can save the adjusted
PICTURE
settings with up to
3 in each of 2 signal groups.
1.
Adjust the different items of the
PICTURE
menu.
2.
Select MEMORY SAVE and press ENTER
3.
Select MEMORY1 - 5 to save and press ENTER
•
The confirmation screen is displayed,
•
ic: In use
TV: Not in use
•
Select ALL DELETE to clear all the saved
settings.
4.
Select OK and press ENTER.
• To cancel, select CANCEL and press ENTER,
or press the RETURN button.
VIDEO, S-VIDEO, COMPONENT,
HDMI (not including VGA60),
1 125 (1 080)/50i, 1 125 (1 080)/60i,
1 125 (1 080)/50p and
1 125 (1 080)/60p signals in PC
connection
VGA60 in HDMI connection, PC not
including 1 125(1 080)/50i,
1 125 (1 080)/60i, 1 125 (1 080)/50p
and 1 125(1 080)/60p
MEMORY1 -5
MEMORY1 - 5
m 1
[
! .' " A ■ -»v ■
I
-OAD
You can access saved settings instantly. See "Loading
a saved setting" on page 25.
1.
Select the required setting from MEMORY1 - 5.
»
Undefined setting will not be displayed.
2.
Press ENTER to activate the selected setting.
NOTE:
• If you have not saved any settings, MEMORY1,
MEMORY2 and MEMORY3 are not displayed.
SIGNAL MODE
The current selected signal is displayed when
PC/COMPONENT/HDMI equipment is connected.
NOTE:
• See "List of compatible signals" on page 45.
English - 33