Panasonic PT-AE1000 Kullanım Talimatları Kılavuzu - Sayfa 2
Projektör Panasonic PT-AE1000 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic PT-AE1000 28 sayfaları. Panasonic lcd projector operating instructions
Ayrıca Panasonic PT-AE1000 için: Kullanım Talimatları Kılavuzu (28 sayfalar)
Sayfayı Yazdır
Important Safety Notice
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require.
We hope it will help you to get the most out of your new product, and that you will be
P'ea&
with your Panasonic LCD projector.The serial number of your product may be found on its
bottom. You should note it in the space provided below and retain this booklet in case service
required.
Model number:
PT-AE1000E
Serial number:
WARNING:
THIS APPARATUS MUST BE EARTHED.
WARNING-
To preventdamage which may result in fire or shock hazard, do not
expose this appliance to rain or moisture.
__
Machine Noise Informational 3. GSGV, January 18,1991: The sound pressure level
at the operator position is equal or less than 70 dB (A) accordmg to ISO 7779._
1
Remove the plug from the mains socket when this unit is not in use for a prolonged
2. Topreventetectrio shock, do not remove cover. No user serviceable parts inside. Refer
servicing to qualified service personnel.
3.
Do not remove the earthing pin on the mains plug. This apparatus is equipped with a
three prong earthing-type mains plug. This plug will only fit an earthing-type mains
socket Thisl a safety feature. If you are unable to insert the plug into the mams socket,
contact an electrician. Do not defeat the purpose of the earthing plug._
CAUTION:
To assure continued compliance, follow the attached installation instructions,
which includes using the provided power cord and shielded interface cables
when connecting to computer or peripheral device. If you use serial port to
connect PC for external control of projector, you must use optional Rb-232b
serial interface cable with ferrite core. Any unauthorized changes or
modifications to this equipment will void the user's authority to operate.
Indication based on the German law "Gerate- und Produktsicherheitsgesetz
Directive 2001/95/EC (Article 5);
Panasonic Marketing Europe GmbH
Hagenauer Str. 43 65203 Wiesbaden F.R.GERMANY
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY. PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the
replacement fuse has a rating of13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark <§> or the BSI mark ^ on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is
replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is
obtained. A replacement fuse cover can be purchased from an Authorised Service Centre,
If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse
should be removed and the plug cut off and disposed of safely. There is a danger of
severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow:
Earth
Blue:
Neutral
Brown:
Live
As the colours of the wire in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the
terminal in the plug which is marked with the letter E or by the Earth symbol i or
coloured GREEN or GREEN - AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which
is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug
which is marked with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and
replace the fuse.
2 -
ENGLISH
ENGLISH - 3