Panasonic PT-D6000E Kullanım Talimatları Kılavuzu - Sayfa 6

Projektör Panasonic PT-D6000E için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic PT-D6000E 42 sayfaları. Dlp based projector commercial use

Sayfayı Yazdır
Panasonic PT-D6000E Kullanım Talimatları Kılavuzu

Precautions with regard to safety

WARNINGS

If you notice smoke, strange smells or noise coming
from the projector, disconnect the mains plug from
the mains socket.
 Do not continue to use the projector in such cases,
otherwise fire or electric shocks could result.
 Check that no more smoke is coming out, and then
contact an Authorised Service Centre for repairs.
 Do not attempt to repair the projector yourself, as this
can be dangerous.
Do not install this projector in a place which is not
strong enough to take the full weight of the
projector.
 If the installation location is not strong enough, it may
fall down or tip over, and severe injury or damage
could result.
Installation work (such as ceiling suspension)
should only be carried out by a qualified technician.
 If installation is not carried out correctly, there is the
danger that injury or electric shocks may occur.
 Do not use other than an authorised ceiling mount
bracket.
If foreign objects or water get inside the projector, or
if the projector is dropped or the cabinet is broken,
disconnect the mains plug from the mains socket.
 Continued use of the projector in this condition may
result in fire or electric shocks.
 Contact an Authorised Service Centre for repairs.
The mains socket shall be installed near the
equipment and shall be easily accessible.
 Unplug the mains plug from the mains socket
immediately when problem occurred.
Do not overload the mains socket.
 If the power supply is overloaded (for example, by
using too many adapters), overheating may occur
and fire may result.
Never attempt to modify or disassemble the
projector.
 High voltages can cause fire or electric shocks.
 For any inspection, adjustment and repair work,
please contact an Authorised Service Centre.
Clean the mains plug regularly to prevent it from
becoming covered in dust.
 If dust builds up on the mains plug, the resulting
humidity can damage the insulation, which could
result in fire. Pull the mains plug out from the mains
socket and wipe it with a dry cloth.
 If not using the projector for an extended period of
time, pull the mains plug out from the mains socket.
Do not handle the mains plug with wet hands.
 Failure to observe this may result in electric shocks.
E
NGLISH - 6
Insert the mains plug securely into the mains socket.
 Do not use other than the provided mains lead.
 If the plug is not inserted correctly, electric shocks or
overheating could result.
 Do not use plugs which are damaged or mains
sockets which are coming loose from the wall.
Do not place the projector on top of surfaces which
are unstable.
 If the projector is placed on top of a surface which is
sloped or unstable, it may fall down or tip over, and
injury or damage could result.
Do not place the projector into water or let it become
wet.
 Failure to observe this may result in fire or electric
shocks.
Do not do anything that might damage the mains
lead or the mains plug.
 Do not damage the mains lead, make any
modifications to it, place it near any hot objects, bend
it excessively, twist it, pull it, place heavy objects on
top of it or wrap it into a bundle.
 If the mains lead is used while damaged, electric
shocks, short-circuits or fire may result.
 Ask an Authorised Service Centre to carry out any
repairs to the mains lead that might be necessary.
Do not place the projector on soft materials such as
carpets or sponge mats.
 Doing so may cause the projector to overheat, which
can cause burns, fire or damage to the projector.
Do not place liquid containers on top of the
projector.
 If water spills onto the projector or gets inside it, fire
or electric shocks could result.
 If any water gets inside the projector, contact an
Authorised Service Centre.
Do not insert any foreign objects into the projector.
 Do not insert any metal objects or flammable objects
into the projector or drop them onto the projector, as
doing so can result in fire or electric shocks.
Do not allow the + and - terminals of the batteries to
come into contact with metallic objects such as
necklaces or hairpins.
 Failure to observe this may cause the batteries to
leak, overheat, explode or catch fire.
 Store the batteries in a plastic bag and keep them
away from metallic objects.