Panasonic PT-EX12K Broşür - Sayfa 6

Projektör Panasonic PT-EX12K için çevrimiçi göz atın veya pdf Broşür indirin. Panasonic PT-EX12K 6 sayfaları. A 2-model lineup with the high-brightness, 16,000-lm pt-ex16k and 13,000-lm
Ayrıca Panasonic PT-EX12K için: Boyutsal Çizim (1 sayfalar)

Sayfayı Yazdır

Specifications

Model

Power supply

Power consumption

Panel size

Display method

LCD panel

Pixels

Pixel configuration

Pure color control device

Lens

Lamp

Screen size (diagonal)

Brightness*²

Center-to-corner uniformity*²

Contrast*²

Resolution

HDMI/DVI-D

RGB (analog)

Scanning

frequency

(YC

)

Video/S-Video

Optical axis shift

Keystone correction range

Installation

DVI-D IN

INPUT1

HDMI IN

ANALOG IN

RGB 5BNC IN/

VIDEO IN

INPUT2

S-VIDEO IN

Terminals

INPUT3/INPUT4

SERIAL IN

SERIAL OUT

REMOTE IN

LAN

USB

Cabinet materials

Dimensions (W x H x D)

Weight

Noise level

Operating temperature

5°C- 30°C [41°F-86°F] (between 1,800 m and 2,700 m [5,906 ft to 8,858 ft] above sea level)

Operating humidity

Supplied accessories

*1 The values given for the recommended lamp replacement cycles are maximum. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

*3 The ET-ELW06 is equipped with only vertical optical axis shift. *4 Compliant with VESA CVT-RB. *5 This port is for use by service personnel only. The USB interface may not operate with all USB compatible equipment.

Caution

Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.

NOTE ON USE

1 This product must not be used in residential areas.

2 This product may cause interference if used in residential areas. Such use must be avoided unless the user takes

special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and

television broadcasts.

3 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a

popping sound, or fail to illuminate, due to impact or extended use.

4 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:

• Never place objects on top of the projector while it is in operation. • Make sure there is an unobstructed space of

1,000 mm (39-3/8 in) or more around the projector's exhaust openings. • If stacking projector units, care must be

taken to provide the recommended space between units. These space requirements also apply to installation

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

Product availability differs depending on region and country. This product may be subject to export control regulations.

The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please

consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the

United States, and other countries and regions or registered trademarks. All other trademarks are the property of their respective

trademark owners. Projection images simulated.

PT-EX16K

200-240 V AC, 50/60 Hz

1,850 W (18 W with standby mode)

380 W x 4, lamp replacement cycle (lamp power:

Normal/Eco1, Eco2): 2,000 hours/3,000 hours*¹

1.02–15.24 m (40–600 inches) (2.54–15.24 m [100–600 inches] with the ET-ELS03), 4:3 aspect ratio

16,000 lm (4-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)

2,500:1 (full on/full off, 4-lamps, lamp power: Auto)

1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)

Dot clock: 230 MHz or lower (Signals exceeding the dot clock rate of 165 MHz are downsampled.)

: 15.75 kHz, f

: 60 Hz [480i (525i)]

: 31.25 kHz, f

: 50 Hz [576p (625p)]

: 33.75 kHz, f

: 60 Hz [1035/60i]

: 28.13 kHz, f

: 25 Hz [1080/25p]

: 27.00 kHz, f

: 48 Hz [1080/24sF]

: 67.50 kHz, f

: 60 Hz [1080/60p]

: 15.75 kHz, f

With the ET-ELW02/ELW04/ELS03/ELM01/ELT02/ELT03: vertical ±39%, horizontal ±10% from center of screen (powered)

With the ET-ELS02: vertical ±50%, horizontal ±10% from center of screen (powered)

Vertical: Maximum ±40°, Horizontal: Maximum ±40° (with XGA signal input, for vertical/horizontal correction only, Optional lens: ET-ELS03)

DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only), 480p, 576p, 720/60p, 720/50p,

1080/60i, 1080/50i, 1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p,

VGA (640 x 480)–WUXGA (1,920 x 1,200)*⁴, compatible with non-interlaced signals only, dot clock: 25–162 MHz

HDMI 19-pin x 1 (compatible with HDCP, compatible with Deep Color), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i,

1035/60i, 1080/24p, 1080/24sF, 1080/25p, 1080/25sF, 1080/30p, 1080/30sF, 1080/60p, 1080/50p,

VGA (640 x 480)–WUXGA (1,920 x 1,200)*⁴, compatible with non-interlaced signals only, dot clock: 25–162 MHz

BNC x 5 (RGB/YP

Optional interface board slot, When the ET-MD16SD1 is installed,

SERIAL IN (SDI IN 1/2): BNC x 2 (SD-SDI signal/single link HD-SDI signal)

SD-SDI signal (YC

Single-link HD-SDI signal (YP

SERIAL OUT (SDI OUT): BNC x 1 (active through)

D-sub 9-pin (male) x 1 for external control

RJ-45 x 1 (for network connection, 100Base-TX/10Base-T, compliant with PJLink™ [class1])

650 x 349 x 815 mm (25.6" x 13.7" x 32.1")

(with legs at shortest position, optional lens not included)

Approximately 46.5 kg (102.5 lbs) (optional lens not included)

51 dB (lamp power: Normal/Eco2), 48 dB (lamp power: Eco1)

5°C- 40°C [41°F-104°F] (less than 1,800 m [5,906 ft] above sea level),

Power cord x 1 (x 2 for PT-EX16KE/EX12KE), power cord holder/power cord cover x 1set, wireless/wired remote control unit,

batteries (AAA/R03/LR03 type x 2), VGA cable x 1, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software,

Real Color Manager Pro.), lens attachment x 1set, lens lock lever fixing bracket x 1set, lightshielding plate x 3set, spacer x 1set, cable tie x 3

46 mm (1.8 inches) diagonal (4:3 aspect ratio)

Transparent LCD panel (x 3, R/G/B)

786,432 (1,024 x 768) x 3, total of 2,359,296 pixels

Stripe

Optional

13,000 lm (2-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)

90 %

Horizontal: 26–80 kHz, vertical: 23–85 Hz, dot clock: 162 MHz or lower

: 15–120 kHz, f

: 48–120 Hz

: 15.63 kHz, f

: 50 Hz [576i (625i)]

: 45.00 kHz, f

: 60 Hz [720 (750)/60p]

: 33.75 kHz, f

: 60 Hz [1080 (1125)/60i]

: 28.13 kHz, f

: 50 Hz [1080/25sF]

: 33.75 kHz, f

: 30 Hz [1080/30p]

: 56.25 kHz, f

: 50 Hz [1080/50p]

: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f

: 15.63 kHz, f

With the ET-ELW06: vertical ±39% from center of screen (powered)*³

With the ET-ELW03: the optical lens shift function cannot be used.

Ceiling/floor, front/rear

D-sub HD 15-pin (female) x 1 (RGB x 1)

/YC

x 1), shared with VIDEO IN (BNC x 1) (composite video)

Mini DIN 4-pin x 1 (S-Video)

4:2:2 10-BIT): 480i, 576i (SMPTE 259M-C compliant)

4:2:2 10-BIT): 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/25sF,

1080/24p, 1080/24sF, 1080/30p, 1080/30sF (SMPTE 292M compliant)

D-sub 9-pin (male) x 1 for link control

M3 Jack x 1 (for wired remote control)

USB type-B (USB connector) x 1*⁵

Molded plastic

0°C- 30°C [32°F-86°F] (between 1,400 m and 2,700 m [4,593 ft to 8,858 ft] above sea level)

20–80 % (no condensation)

where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is

placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating

temperature listed in the specifications table during use. Also, make sure the projector's intake and exhaust

openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being

recirculated into the intake opening.

5 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.

• The brightness of the lamp will gradually decrease with use.

6 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp

performance.

PT-EX12K

100-240 V AC, 50/60 Hz

940 W (17 W with standby mode)

380 W x 2, lamp replacement cycle (lamp power:

Normal/Eco1, Eco2): 2,000 hours/3,000 hours*¹

4,000:1 (full on/full off, 2-lamps, lamp power: Auto)

: 31.50 kHz, f

: 37.50 kHz, f

: 28.13 kHz, f

: 27.00 kHz, f

: 33.75 kHz, f

: 50 Hz [PAL/PAL-N/SECAM]

D-sub 9-pin (female) x 1 for external control

538.5 x 268 x 757 mm (21.2" x 10.6" x 29.8")

(with legs at shortest position, optional lens not included)

Approximately 28 kg (61.7 lbs) (optional lens not included)

42 dB (lamp power: Normal/Eco2), 39 dB (lamp power: Eco1)

0°C- 40°C [32°F-104°F] (less than 1,400 m [4,593 ft] above sea level),

For more information about Panasonic projectors

http://panasonic.net /avc/projector

All information included here is valid as of February 2012.

PT-EX16KG2 Printed in Japan.

: 60 Hz [480p (525p)]

: 50 Hz [720 (750)/50p]

: 50 Hz [1080 (1125)/50i]

: 24 Hz [1080/24p]

: 60 Hz [1080/30sF]