Panasonic PT-LB1E Kullanım Talimatları Kılavuzu - Sayfa 6
Projektör Panasonic PT-LB1E için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic PT-LB1E 19 sayfaları. Pt-lb2 series lcd projectors
Ayrıca Panasonic PT-LB1E için: Kullanım Talimatları Kılavuzu (19 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar)
Sayfayı Yazdır
Network setting of the projector
NETWORK
Wired LAN settings
You can make detailed wired LAN settings.
1
Select [WIRED LAN] in the NETWORK menu and press the [ENTER] button.
WIRED DETAILED SETUP
CANCEL
SELECT
DHCP
ON:
If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be
acquired.
OFF:
If a DHCP server does not exist in the network to which the projector is connected, additionally set [IP
ADDRESS ], [SUBNETMASK ] and [DEFAULT GATEWAY ].
"Glossary" (See page 18)
2
Select each item with the [▲▼] buttons and change the settings following the
menu's Operating guidance.
3
Select [OK] with the [▲▼] buttons and press the [ENTER] button.
Default network settings
The following settings are set before the projector leaves the factory.
DHCP
IP ADDRESS
SUBNETMASK
DEFAULT GATEWAY
OFF
DHCP
192.168. 10.100
IP ADDRESS
SUBNETMASK
255.255.255.
DEFAULT GATEWAY
192.168. 10. 1
OK
CANCEL
OFF
192.168.10.100
255.255.255.0
192.168.10.1
(cont.)
0
6