Panasonic RQTV0080-1P Kullanım Talimatları Kılavuzu - Sayfa 10

Stereo sistemi Panasonic RQTV0080-1P için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic RQTV0080-1P 24 sayfaları. Panasonic cd stereo system operating instructions model no. sc-pm23 rqtv0080-1p

Sayfayı Yazdır

Radio

Manual tuning
Manual tuning
1
Press [TUNER/BAND] to select "FM" or "AM".
2
Press [PLAY MODE] to select "MANUAL".
3
Press [ /REW/4] or [ /FF/¢] to select the
frequency of the required station.
" ST " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press [ /REW/4] or [ /FF/¢] for a moment until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may not function when there is excessive
interference.
• To cancel auto tuning, press [ /REW/4] or [ /FF/¢]
once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
10
Numeric
buttons
Memory preset
Memory preset
Up to 15 stations can be set in both the FM and AM bands.
Preparation
Press [TUNER/BAND] to select "FM" or "AM".
Automatic presetting
Automatic presetting
Press and hold [PROGRAM] to start presetting.
Manual presetting
Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
Press [ /REW/4] or [ /FF/¢] to tune to the
2
required station.
3
Press [PROGRAM].
4
Press numeric buttons to select a channel.
The station occupying a channel is erased if another
station is preset in that channel.
Repeat steps 2 to 4 to preset more stations.
5
Selecting a preset station
Selecting a preset station
Press numeric buttons to select the channel.
For channels 10 to 15 press [h10], then the two digits.
OR
1
Press [PLAY MODE] to select "PRESET".
2
Press [ /REW/4] or [ /FF/¢] to select the
channel.
FM allocation setting
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER/BAND].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2
Continue to hold down [TUNER/BAND].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After the setting is changed, any previously preset
frequency will be cleared.