Panasonic RQTV0097-2P Kullanım Talimatları Kılavuzu - Sayfa 8
Stereo sistemi Panasonic RQTV0097-2P için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic RQTV0097-2P 24 sayfaları. Cd stereo system
Sayfayı Yazdır
Discs (continued)
Checking which discs are in the trays (CD CHECK)
Checking which discs are in the trays (CD CHECK)
CD
MP3
WMA
1
Press [CD CHECK].
Press the button again to close the trays.
2
Note
• The tray with a disc being played will not open.
• If the player is stopped, all trays will open.
• Do not remove or insert discs during disc check.
• Do not pull out the trays during disc check.
• 8 cm discs cannot be checked.
Display function
Display function
This function allows you to display the information of the
current track.
Press [DISPLAY] repeatedly during play or pause mode.
CD
Elapsed time
MP3
WMA
Remaining
Elapsed time
time
Tag (Artist)
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
the track.
Advanced play
Advanced play
Direct access play
Direct access play
This function allows you to start play from a specifi c track.
CD
Press the numeric buttons to select and play your
desired track.
MP3
WMA
1
Press [ALBUM
¢
2
Press
3/FF/
] once and then the numeric buttons
[
to select and play your desired track.
For two-digit track, press [h10] once, and then the two
digits.
For three-digit track, press [h10] twice, and then the three
digits.
Note
This function does not work during any random/program mode.
Repeat play
Repeat play
You can repeat program play or other selected play mode.
CD
MP3
WMA
Press [REPEAT] before or during play.
"REPEAT ON" and "
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and "
8
CD CHECK
Remaining time
Album name Track name
Tag (Track)
Tag (Album)
or
] to select the album.
" are displayed.
" is cleared.
Program play
Program play
This function allows you to program up to 24 tracks.
CD
Press [CD 6] and then [STOP
1
2
Press [PROGRAM].
3
Press [DISC].
(Within 10 seconds or so)
4
Press [1~5] to select your desired disc.
5
Press the numeric buttons to select your desired
track.
6
Repeat steps 3 to 5 to program other tracks.
Press [CD 6] to start play.
7
MP3
WMA
Press [CD 6] and then [STOP
1
2
Press [DISC].
(Within 10 seconds or so)
3
Press [1~5] to select your desired disc.
7
4
Press [STOP
].
5
Press [PROGRAM].
6
Press [ALBUM
or
album.
¢
7
Press
3/FF/
] once and then the numeric buttons
[
to select your desired track.
8
Press [ENTER].
Repeat steps 6 to 8 to program other tracks.
Press [CD 6] to start play.
9
To
Action
cancel program mode Press [PROGRAM] in the stop mode.
Press [PROGRAM] then [CD 6].
replay the program
check program
Press [ /REW/4] or [ /FF/¢] when
contents
"PGM" is displayed in the stop mode.
To check while programming, press
[PROGRAM] twice after "PGM" appears,
then press [ /REW/4] or [ /FF/¢] .
add to the program
CD
Repeat step 3 to 5 in the stop mode.
MP3
WMA
Repeat steps 6 to 8 in the stop mode.
clear the last track
Press [DEL] in the stop mode.
clear all programmed
Press [CLEAR] in the stop mode. "CLR ALL"
tracks
is displayed.
Note
• When you try to program more than 24 tracks "PGM FULL"
appears.
• During program play, skipping is always in the programmed order,
whether forward or backward.
• You cannot program CD-DA together with MP3 and WMA tracks.
• You cannot change or open other trays during program play mode.
•
CD
During program play, you can search backward or forward only
within the current track.
•
WMA
MP3
The program memory is cleared when you change a disc or open
a disc tray.
7
].
7
].
] to select your desired