Panasonic RX-ES29 Kullanım Talimatları Kılavuzu - Sayfa 9
Stereo sistemi Panasonic RX-ES29 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic RX-ES29 16 sayfaları. Portable stereo cd system
Ayrıca Panasonic RX-ES29 için: Kullanım Talimatları Kılavuzu (29 sayfalar), Kullanım Talimatları Kılavuzu (18 sayfalar)
Sayfayı Yazdır
Repeat play and Album play
You can play (
) or repeat play (
only in the selected album.
Press [PLAY MODE] before or during playback to
select the desired mode.
,
#
#
OFF (no indication)
≥
(
): play all tracks in the selected album one time.
≥
(
): play all tracks in the selected album repeatedly.
≥
You can select another album with album skip.
≥
You cannot use random play with MP3.
MP3 Intro play
Intro functions allow you to start playing the 1st track of all
album for 10 seconds each in the stop mode.
Press [INTRO] to start intro play.
Intro function is cancelled after playing the 1st track of last
album in the disc. To stop during the process, press [INTRO]
or [∫ TAPE/CD].
This unit can play MP3, a method of compressing audio
without affecting audio quality.
ª When creating MP3 files to play on this unit
Disc format: ISO9660 level 1 and level 2 (except for
extended formats)
Title names and album names are not displayable on
this unit.
ª Limitation on MP3
≥
This unit is compatible with multi-session but if there
are a lot of sessions it takes more time for play to
start. Keep the number of sessions to a minimum to
avoid this.
≥
This unit cannot play files recorded using packet
write.
≥
If a CD-ROM format CD contains MP3 and files other
than MP3, only the MP3 files will be playable.
≥
Depending on how you create MP3 files, they may
not play in the order you numbered them or may not
play at all.
MPEG Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson multimedia.
[MP3]
) tracks
]
#
(====
n
Program play
[CD-DA] [MP3]
You can program up to 24 tracks.
On the main unit
Preparation:
Press [∫ TAPE/CD] to switch to CD stop mode.
[1] Turn [TIME/PRESET TUNE
select the track.
[2] Press [ MEMORY CLEAR].
C: Programmed track
D: Play sequence
[3] Repeat step [1] and [2] to
program other tracks.
[4] Press [CD 1/;] to start play.
On the remote control
Preparation:
Press [STOP ∫] to switch to CD stop mode.
[1] Press [PROGRAM/ CLEAR].
"
"
appears on the display.
[2] Press the numeric button(s) to select the desired
track.
For 2-digits number: press [S10] once, then the 2 digits.
For 3-digits number: press [S10] twice, then the 3 digits.
Repeat this step to program other tracks.
[3] Press [CD 1/;] to start play.
The program remains intact even if play is stopped or the unit is
turned off. "Cd-P" for [CD-DA] or "P" for [MP3] appears when play
is stopped to indicate the contents are in the memory.
To
Operations
cancel*
Press and hold [ MEMORY
until "CLEAR" is displayed.
On remote control, press and
hold [PROGRAM/ CLEAR].
check the program
Turn [TIME/PRESET TUNE
contents (while
"Cd-P" for [CD-DA] or
On remote control, press
"P" for [MP3] is
[–/:] or [9/+].
displayed)
* The mode is also cancelled if the CD tray is opened.
Notes:
≥
"FULL" is displayed
If 24 tracks have already been programmed.
"– –:– –" is displayed [CD-DA]
≥
You can still program and play tracks if the total elapsed play
time of the program exceeds 200 minutes.
TRACK SKIP
] to
C
e.g. MP3
CLEAR] in the CD stop mode
TRACK SKIP
].
D
9
RQT7912