Panasonic SA-AK250 Kullanım Talimatları Kılavuzu - Sayfa 10
Stereo sistemi Panasonic SA-AK250 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-AK250 20 sayfaları. Panasonic cd stereo system operating instructions
Ayrıca Panasonic SA-AK250 için: Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Discs (continued)
Changing a single disc (SINGLE CHANGE)
By main unit only
While one disc is playing, you can change the discs in other
trays.
Press [0, SINGLE CHANGE].
1
2
Press [3,1] ~ [3, 5] to select the desired tray.
3
Change the disc.
Press [0, SINGLE CHANGE] again to close the tray.
4
Checking the track information
You can select a desired disc display mode.
Press [DISPLAY] during play or pause.
Elapsed play time
Elapsed
➞
play time
➞
Tag (Artist)
Tag (Track)
Note:
• When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
• When a title is longer than 9 characters, it will scroll across the
display. The scrolling will start after every 3 seconds.
• "NO TAG" is displayed if titles with tags have not been entered.
• Maximum number of displayable characters: approximately 32
• This unit can display album, track and artist name with MP3 ID3
tags (version 1.0 and 1.1).
• Titles containing text data that the unit does not support cannot
be displayed.
• ID3 is a tag embedded in MP3 track to provide information about
the track.
• Titles entered with 2-byte code cannot be displayed correctly on
this unit.
Advanced play
Advanced play
Program play
This function allows you to program up to 24 tracks.
Press [6, CD] and then [7, CLEAR].
1
2
Press [PROGRAM].
"PGM" appears.
Press [DISC] and then [1] ~ [5] to select the disc.
3
4
Press the numeric buttons to select your desired
track.
Repeat steps 3 to 4 to program other tracks.
5
Press [6, CD] to start play.
10
RQT8043
RQTV0196-B.indd 10
RQTV0196-B.indd 10
a single disc (SINGLE CHANGE)
Remaining play time
Remaining
➞
Album Name
play time
➞
➞
Tag (Album)
Track Name
Press [DISC] and then [1] ~ [5] to select the disc.
1
2
Press [7, CLEAR].
Press [PROGRAM].
3
4
Press [ALBUM (
or
album.
To select an album directly, press the numeric
buttons after pressing [ALBUM (
5
Press [4,
/ REW] or [¢,
track.
To select a track directly, press the numeric buttons
after pressing [4,
/ REW] or [¢,
6
Press [ENTER].
Repeat steps 4 to 6 to program other tracks.
Press [6, CD] to start play.
7
For two-digit track, press [h10] once then the two digits.
For three-digit track, press [h10] twice then the three digits.
To
Action
cancel
Press [PROGRAM] in the stop mode.
program mode
replay the
Press [PROGRAM] then [6, CD] in the stop
program
mode.
add to the
program
Repeat steps 3 to 4 in the stop mode.
Repeat steps 4 to 6 in the stop mode.
check program
Press [4,
/ REW] or [¢,
contents
"PGM" is displayed in the stop mode.
The track number, program order and disc
number are displayed:
Track number
1
The program order is displayed followed by the
album number and track number.
clear the last
Press [DEL] in the stop mode.
track
clear all
Press [7, CLEAR] in the stop mode. "CLEAR
programmed
ALL" is displayed. Within 5 seconds, press the
tracks
button again to clear all tracks.
Note:
• You cannot program CD-DA together with MP3 tracks.
• The program memory is cleared when you change a disc or open
the disc tray.
• You cannot program more than one disc.
)] to select your desired
or
)].
/ FF] to select the
/ FF].
/ FF] when
Program order
2
3
4
5
2/23/07 4:49:14 PM
2/23/07 4:49:14 PM