Panasonic SA-AK250 Kullanım Talimatları Kılavuzu - Sayfa 14
Stereo sistemi Panasonic SA-AK250 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-AK250 20 sayfaları. Panasonic cd stereo system operating instructions
Ayrıca Panasonic SA-AK250 için: Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Timer (continued)
To activate the timer
Press and hold [– ˚PLAY/REC] to turn on your desired
5
timer.
Press [y] to turn off the unit.
6
The unit must be off for the timers to operate.
Other basic operations
Other basic operations
To
Action
change the
Repeat steps 1 to 4 and 6 (
settings
above).
1) Press and hold [– ˚PLAY/REC] to clear the
change the
source or
volume
2) Make changes to the source or volume.
3) Perform steps 5 to 6 (
check the
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
settings
Press and hold [– ˚PLAY/REC] to clear the
cancel
timer indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time everyday if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the
source. If you wish to playback or record from the portable audio
equipment, just activate the equipment's play mode and increase
the volume. (See the portable audio equipment's instruction
manual.)
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP] to select your desired time.
SLEEP 30
SLEEP OFF
To cancel
Press [SLEEP] to select "SLEEP OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.
Note:
• The play and sleep timer or the record and sleep timer can be
used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
• The sleep timer turns off when you perform the record function.
14
RQT8043
˚ PLAY
˚ REC
➞
no display (off)
\
see page 13 and
timer indicator from the display.
\
see above).
SLEEP 60
SLEEP 90
SLEEP 120
Sleep timer indicator
Sound adjustment
Selecting sound effects
Selecting sound effects
Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY
SOFT
CLEAR
➞
➞
➞
FLAT (off)
Setting
Effect
HEAVY
Adds punch to rock
SOFT
For background music
CLEAR
Clarifi es higher frequencies
VOCAL
Adds gloss to vocal
DISCO
Produces sound with the same kind of lengthy
reverberations heard at a disco
LIVE
Makes vocals more alive
HALL
Adds an expansiveness to the sound to produce
the atmosphere of a great concert hall
FLAT
No effect
MANUAL
Manual EQ
1
Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS
➞
Setting
Effect
BASS
For lower pitch sound
MID
For middle pitch sound
TREBLE
For higher pitch sound
2
Press [4,
/ REW ] or [¢,
level.
OR
Press [+] or [–] on the main unit to adjust the level.
Note:
• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the
next time you select "MANUAL EQ".
• By main unit only
AK450
Press and hold [MANUAL EQ] to turn on or off the LED fl ashing.
HARD
BASS
Enhancing the bass sound
Enhancing the bass sound
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your
room are not optimal.
To activate
Press [HARD BASS].
To cancel
Press [HARD BASS] again.
Note:
The actual effect depends on the disc.
VOCAL
DISCO
➞
➞
➞
HALL
LIVE
MID
➞
TREBLE
/ FF] to adjust the