Panasonic SA-AK48 Kullanım Talimatları Kılavuzu - Sayfa 18

Stereo sistemi Panasonic SA-AK48 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-AK48 32 sayfaları. Cd stereo system model no. sc-ak48
Ayrıca Panasonic SA-AK48 için: Kullanım Talimatları Kılavuzu (33 sayfalar)

Panasonic SA-AK48 Kullanım Talimatları Kılavuzu
1
4
2
TUNE MODE
1
TAPE
DECK 1/2
2
DECK 1
OPEN
3
REV MODE
4
TUNE TIME ADJ
5
VOLUME
A
TAPE
DECK 1/2
18
RQT5321
DECK 2
OPEN
Front side
TUNE TIME ADJ
Tape direction
DOWN
UP
Deck in use

Listening to tapes

Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE I
5
HIGH POSITION/TYPE II
METAL POSITION/TYPE IV
You can use either deck 1 or deck 2 for tape playback.
2
Press [TAPE, DECK 1/2].
1
The unit will come on automatically.
If the unit was off and a cassette was loaded, play will start
3
automatically (One touch play function).
Press [c DECK 1 OPEN] or [c DECK 2 OPEN] and
2
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
3
Press [REV MODE] to select the reverse mode.
Every time you press the button:
: One side is played, then playback stops automatically.
: Both sides (front side
time each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
Press [/] or [-/ J] to start playback.
[-/ J] : The forward side (front side) will play.
[/]
: The reverse side will play.
Adjust the volume level.
5
To stop tape playback
Press [L].
To change the deck to be used
Press [TAPE, DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select "
played 8 times each.
Note
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
reverse side) are played one
A
". Both tapes will be