Panasonic SA-AK521 Kullanım Talimatları Kılavuzu - Sayfa 20

Stereo sistemi Panasonic SA-AK521 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-AK521 40 sayfaları. Cd stereo system model no. sc-ak521

Sayfayı Yazdır
Panasonic SA-AK521 Kullanım Talimatları Kılavuzu

Specifications

AMPLIFIER SECTION
PMPO
Power output
THD 10%, both channels driven
60 Hz–3 kHz
55 W per channel (6 Ω)
(Low channel)
3 kHz–16 kHz
(High channel) 55 W per channel (6 Ω)
40 Hz–100 Hz
(Subwoofer channel)
Total power
Power output
THD 10%, both channels driven
1 kHz
65 W per channel (6 Ω)
(Low channel)
10 kHz
(High channel) 65 W per channel (6 Ω)
80 Hz
(Subwoofer channel)
Total power
Input sensitivity
AUX
MIC
Input Impedance
AUX
MIC
AMPLIFIER SECTION GCP
RMS Power output
THD 10%, both channels driven
1 kHz
65 W per channel (6 Ω)
(Low channel)
10 kHz
(High channel) 65 W per channel (6 Ω)
80 Hz
(Subwoofer channel)
Total power
Input sensitivity
AUX
MIC
Input Impedance
AUX
MIC
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
20
RQT7418
FM TUNER SECTION
PL
3500 W
PL
Frequency range
GCP
Frequency range
Sensitivity
140 W (8 Ω)
S/N 26 dB
360 W (Total)
Antenna terminal(s)
AM TUNER SECTION
PL
Frequency range
GCP
Frequency range
160 W (8 Ω)
420 W (Total)
Sensitivity
250 mV
PL
0.7 mV
S/N 20 dB (at 1000 kHz)
GCP
13.3 kΩ
S/N 20 dB (at 999 kHz)
680 Ω
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
Tape speed
160 W (8 Ω)
Overall frequency response
420 W (Total)
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I)
250 mV
S/N
0.7 mV
Wow and flutter
Fast forward and rewind time
13.3 kΩ
680 Ω
CD SECTION
Sampling frequency
Decoding
Beam source/wavelength
Number of channels
Frequency response
Wow and flutter
Digital filter
D/A converter
MP3
Bit rate
Sampling frequency
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
87.50 – 108.00 MHz (50 kHz steps)
2.5 ØV (IHF)
2.2 ØV
75 Ω (unbalanced)
520 – 1710 kHz (10 kHz steps)
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
560 ØV/m
560 ØV/m
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz – 14 kHz
50 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
44.1 kHz
16 bit linear
Semiconductor laser/780 nm
Stereo
20 Hz–20 kHz (+1, –2 dB)
Below measurable limit
8 fs
MASH (1 bit DAC)
32 kbps–320 kbps
32 kHz, 44.1 kHz, 48 kHz
SPEAKER SECTION
Front speakers SB-AK520
Type
3 way, 3 speaker system
Speaker(s)
Woofer
16 cm cone type
Tweeter
6 cm cone type
Super tweeter
2.5 cm piezo type
Impedance
HIGH
LOW
Input power (IEC)
HIGH
LOW
Output sound pressure level
83 dB/W (1.0 m)
Cross over frequency
2.6 kHz, 10 kHz
Frequency range
37 Hz–23 kHz (–16 dB)
44 Hz–22 kHz (–10 dB)
Dimensions (WxHxD) 241 x 360 x 239 mm
Mass
Subwoofer SB-WAK520
Type
1 way, 1 speaker system
Speaker(s)
Subwoofer
16 cm cone type
Impedance
Input power (IEC)
160 W (Max)
Output sound pressure level
80 dB/W (1.0 m)
Frequency range
40 Hz–220 Hz (–16 dB)
45 Hz–180 Hz (–10 dB)
Dimensions (WxHxD) 266 x 331 x 264 mm
Mass
GENERAL
Power supply
PL
AC 120 V, 60 Hz
GCP
AC 110/127/220–230/240 V, 50/60 Hz
Power consumption
PL
GCP
Dimensions (WxHxD) 250 x 330 x 369 mm
Mass
PL
GCP
Power consumption in standby mode
PL
GCP
Note
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels "HIGH" and "LOW" on the rear
of the speakers refer to High frequency
and Low frequency.
6 Ω
6 Ω
65 W (Max)
65 W (Max)
3.8 kg
8 Ω
4.1 kg
267 W
279 W
8.2 kg
8.1 kg
0.34 W
0.85 W