Panasonic SA-AK770 Kullanım Talimatları Kılavuzu - Sayfa 21

Stereo sistemi Panasonic SA-AK770 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-AK770 24 sayfaları. Panasonic cd stereo system operating instructions

Sayfayı Yazdır

Panasonic SA-AK770 Kullanım Talimatları Kılavuzu

■ Using the USB device

No response when

[¶ REC, TAPE] button is

pressed.

USB recording stops

suddenly.

"REC ERROR"

The USB drive or its contents

cannot be read.

Slow operation of the USB

device.

"USB OVER CURRENT

ERROR"

"HI-SPEED CAN'T REC"

"PLEASE WAIT XX MIN"

"DEVICE FULL"

■ Disc trays

Disc tray(s) cannot open.

"CHGR ERR" is displayed.

• Disconnect the USB device and then reconnect it back. Alternatively, turn the unit off and

then back on.

• Select a suitable recording mode (128 KBPS or 192 KBPS) and resume recording.

• The USB drive format or its contents is/are not compatible with the system, "NO PLAY" is

displayed. Unplug the USB device and insert it again.

Alternatively, format the USB device and record the desired tracks again and playback the

device.

• The USB host function of this product may not work with some USB devices.

• USB devices with storage capacity of more than 8 gigabytes may not work in some

instances.

• Large ﬁ le size or high memory USB ﬂ ash drive takes longer time to read.

• The USB device is drawing too much power. Disconnect the USB device. Turn the unit off

and then back on.

• You cannot use high-speed recording while using analogue mode. Change to digital mode

or use normal recording.

• You cannot perform a second high-speed recording. You have to wait until the displayed

"XX" minutes have lapsed prior to performing the next high-speed recording.

• You cannot perform high-speed recording because the total USB remaining REC

(recording) time of the USB device is less than the total time of the music source.

Change to a USB device which has the appropriate recording time and perform the high-

speed recording again.

• Press [y/I] to release the jammed tray(s) as the unit will switch off. Turn it on again and the

tray(s) will initialise to the previous tray(s) condition.

• If this still does not ﬁ x the problem, please consult the dealer.

Page

—

RQT8043