Panasonic SA-PM9 Kullanım Talimatları Kılavuzu - Sayfa 16
Stereo sistemi Panasonic SA-PM9 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SA-PM9 24 sayfaları. Panasonic operating instructions cd stereo system sc-pm9
STOP
/
REW
/
,
/ /
FF
1
OPEN
2
TAPE
3
16
RQT7360
Top of the unit
1
3
2
Insert inside the
guides
Forward side
Cassette tapes
1
Press [OPEN 0] to insert a cassette with the tape
facing in.
When the button is pressed, the unit comes on
automatically. Make sure the cassette is fully inserted and
close the lid by hand.
2
Press [TAPE 3] to start playback.
One side is played, then playback stops automatically. To
play on the other side of the cassette, turn the cassette
over and press [TAPE 3].
3
Adjust the volume.
To
Action
Press [STOP 7].
stop tape playback
Press [TAPE 3] when the system is
start one touch play
OFF with the cassette loaded.
fast-forward and
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢] in
rewind
the stop mode.
Cassette tape selection and care
Types of cassettes which can be played correctly
Use normal position tapes.
High position and metal position tapes can be played, but the
unit will not be able to do full justice to the characteristics of
these cassettes.
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should
be wound up before the tape is played.
• Endless tapes can get caught up in the deck's moving parts
if used incorrectly.
To find the beginning of a program
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there.
Each press increases the number of tracks skipped, up to a
maximum of 9.
Press [4 4 4 4 4 /REW/4] or [3 3 3 3 3 /FF/¢] during play.
Notes
The TPS function searches for silent parts of about 4 seconds in length
which are normally found between tunes. As a result, it may not function
properly in the following cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes