Panasonic SAAK320 - MINI HES W/CD PLAYER Kullanım Talimatları Kılavuzu - Sayfa 8
Stereo sistemi Panasonic SAAK320 - MINI HES W/CD PLAYER için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Panasonic SAAK320 - MINI HES W/CD PLAYER 20 sayfaları. Panasonic cd stereo system operating instructions models sc-ak520 sc-ak523 sc-ak320 sc-ak323
Sayfayı Yazdır
CDs
Basic play
1
Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
2
Set a CD in the tray.
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3
Press [1]–[5] to play your desired disc.
1
5
4
3
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. (A see right)
To stop the disc play
Press [L, STOP].
The total number of tracks and total playing time are shown.
One touch play
During standby mode and when a CD is loaded, press [:/J, CD] or
[1]–[5].
The unit comes on and play starts.
To pause
To search forward/
backward
To skip forward/
8
backward
RQT7330
(Label must face upward.)
Current disc indicator
2
Press [:/J, CD] during play.
Press again to resume play.
Hold down [g/REW/3] (backward)
or [f/FF/4] (forward) during play or pause.
Press [g/REW/3] (backward) or
[f/FF/4] (forward) during play or pause.
Note
•
During 1-RANDOM or A-RANDOM play (A see below), you cannot
skip to tracks already played.
•
During program play (A page 9), 1-RANDOM or A-RANDOM play,
you can search only within the track.
•
You cannot use search function for MP3 files.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
CD display
You can display the remaining play time of the current track.
On the remote control
Press [CD DISP] during play or pause.
On the main unit
AK320 AK323
Press [DISP, –DEMO] during play or pause.
Every time you press the button:
Elapsed play time ↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
Repeat play
Remote control only
Press [REPEAT] during play.
"
" is displayed.
To cancel repeat play
Press [REPEAT] to clear "
" .
To listen to specific CDs and tracks
(CD Play Mode function)
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC
1-SONG
1-RANDOM
1-DISC
ALL-DISC:
Plays all loaded discs in succession from the
selected disc to the final disc \.
1-SONG:
Plays one selected track on the selected disc.
1-RANDOM: Plays one selected disc in random order.
A-RANDOM: Plays all loaded discs in random order.
1-DISC:
Plays one selected disc.
(The original display is restored in about 2 seconds.)
Proceed to step 4 when you selected A-RANDOM in step 1.
2
Press [DISC] and
(within 10 seconds)
disc.
The CD starts.
3
Only when you selected "1-SONG" in step 1
Select the track with the numbered buttons.
To select a track 10 or over, press [>10] then the two digits.
Play starts from the selected track.
4
Only when you selected "A-RANDOM" in step 1
Press [:/J, CD] to start play.
To stop play
Press [L, CLEAR].
When playback ends
The current play mode will be retained in memory until it is changed
even if the unit is turned off.
\ Final disc
For example, if play starts from disc 4, disc 3 will be the "final disc".
Order of progression: Disc 4z5z1z2z3
Note
•
You can use repeat mode with CD Play Mode function.
•
You cannot use program mode together with CD Play Mode function.
A-RANDOM
[1]–[5] to select the