Biomeme Franklin Kullanıcı Kılavuzu - Sayfa 15

Laboratuvar Ekipmanları Biomeme Franklin için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Biomeme Franklin 18 sayfaları. Real-time pcr thermocycler

Sayfayı Yazdır

Troubleshooting

Why is my Bluetooth not connecting?

If you are having trouble connecting, ensure that you enabled Bluetooth on

both your smartphone and thermocycler.

Why is my thermocycler not showing up in the connection list?

Ensure that Bluetooth is turned on. The LED next to the button should be

illuminating blue. If your thermocycler is still not showing, try scanning

multiple times to allow for discovery.

My Bluetooth connection was lost during a test run...

If you lose Bluetooth connection, the smartphone app will notify you that the

connection has been lost. It will prompt you to reconnect to the thermocycler

if you are able to. Upon reconnecting, the test data will update on the

smartphone after a short delay (1-2 seconds).

What happens if my test stops prematurely?

If your test fails, the smartphone will notify you of the error returned from

the thermocycler. Your last run will be saved in the Biomeme mobile app

up to the point of failure, but the data will not be processed resulting in no

CQ values, baseline, or graph of smooth data. The raw data and information

about your run is still exportable through the xlsx spreadsheet, however.

My thermocycler turned off during a test run...

If your thermocycler turns off during a test, then the thermocycler battery

may be dead and the unit should be plugged into power. Your connection to

the smartphone will also be lost. If this happens, we recommend you to stop

the run in the smartphone mobile app. See Recovering & Reattaching Test

Data for more details.

1000003.01-01.2018