Biomorph Pro Plus Desk Hızlı Kılavuz - Sayfa 3

İç Mekan Mobilyaları Biomorph Pro Plus Desk için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Biomorph Pro Plus Desk 3 sayfaları.

Operation of the DPF4T "multiple references"

= Parallel up

= Parallel down

= Store memory

= Toggle button

••

= Memory 1

••

= Memory 2

Function:

Compared to a standard DPF1C the ﬁ rst memory button on the DPF4T is replaced by a toggle button, i.e.

that the panel has 2 memory buttons instead of 3 (memory 1 and memory 2).Besides the toggle button the

DPF4T works like the DPF1C.

Up and down ( V):

You just either have to activate the up or down button for parallel drive and the system will drive until

releasing the button again or when the system reaches end position.

Memory:

The four small buttons are used for toggle function, memory drive and storing memory.

Store memory

• Press S – button, the display will ﬂ ash for 2 seconds

• Within these two seconds press one of the small buttons with dots and the position will be stored at this

button 1A.

• The panel will acknowledge by showing "1"or "2" in the display depending on the chosen position

Memory drive (small buttons with dots)

Press one of the memory buttons and the system will start driving to the pre-programmed memory position.

Keep the button pressed until the position is reached.

Display function

Shows the actual height in either cm or inch.

Page 19 of 40

DPF1C - Desk Panel