EasyPet EP-28A Kullanıcı Kılavuzu - Sayfa 5
Evcil Hayvan Bakım Ürünü EasyPet EP-28A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. EasyPet EP-28A 9 sayfaları. Automatic anti-bark collar
Sayfayı Yazdır
The number of triggering
1
st
triggering
2
nd
triggering
3
rd
triggering
4
th
triggering
5
th
triggering
...
20
th
triggering
21
st
triggering
* For safety mode details, please refer to step 5 Builtin Safety Feature.
4.3 Alternative way to disable/isolate the shock correction
Simply unscrew the metal prongs on the collar unit and put on the plastic prongs instead, this
will also remove the shock correction effect on the dog.
4.4 Standby mode on the collar
If the collar is not triggered within 10 minutes in a quiet environment, the collar will go into
standby mode. The indicator light on the collar will stay off. If you wish to check which mode
the collar is working on, simply press on the power button once, this will bring the collar unit
back into working mode and the indicator light should start flashing slowly (once every 6
seconds) to show you which mode the collar is working on.
When the collar is in standby mode, any barking from the dog or sound from surroundings will
reactivate the collar into working mode.
Shock correction enabled
mode
Beep (2 seconds)
Vibration (2 seconds)
Beep + Vibration (2 seconds)
+ 1
st
Level of shock correction
Beep + Vibration (2 seconds)
+ 2
nd
Level of shock
correction
Beep + Vibration (2 seconds)
+ 3
rd
Level of shock correction
...
Beep +Vibration (2 secs) +
18
th
Level shock correction
(highest level)
Into safety mode, three short
beeps only (for the next 3
minutes)*
Pure vibration correction
mode
Beep (2 seconds)
Vibration (2 seconds)
Beep + Vibration (2 seconds)
Beep + Vibration (2 seconds)
Beep + Vibration (2 seconds)
...
Beep + Vibration (2 seconds)
Beep + Vibration (2 seconds)