Axis 231D Ürün Talimatları - Sayfa 10
Güvenlik Kamerası Axis 231D için çevrimiçi göz atın veya pdf Ürün Talimatları indirin. Axis 231D 14 sayfaları. Axis 231d+: connection guide
Ayrıca Axis 231D için: Bağlantı Kılavuzu (1 sayfalar)
Sayfayı YazdırInstalling Axis 233 Camera
1. Note the position of the mounting holes on the camera
bracket (see diagram below).
2. Since the 233 camera operates on 24vac, the power
board that is located inside the housing is not needed.
The remove the power board, start by loosening the
screws on the terminal block and disconnect the
orange and red wires.
3. With a Phillips head screwdriver remove the (4) machine
screws holding the power board to the base bracket.
Remove the power board.
Camera Bracket Mounting holes
Mounting holes for housing
Machine screws (4)
Base Bracket
4. Now remove the Base Bracket.
5. Now attach (4) 1" spacers (located in the packet that
came with the housing) to the base bracket.
1"
- 10 -
Attach (4) 1" spacers