dibea D18 Kullanım Kılavuzu - Sayfa 6

Elektrikli Süpürge dibea D18 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. dibea D18 7 sayfaları. Cordless vacuum cleaner

Sayfayı Yazdır

How To Use

III. How to charge:

1) When only one indicator light is blinking, please turn off the appliance, put it back to

the charging base, then make sure the plug of the charger has been inserted into the

socket. When charging, the indicate lights will become flashing green.

Note： How to use the wall bracket

1. Hang it on the wall with screws

2. Use 3M stickers to make the bracket glued to the wall, for storing the vacuum cleaner

(make sure the height is the same as the vacuum cleaner itself, totally hanging away

from floor is not acceptable)

Wall

Blinking

Charging port

2) It will have 3 green lights on after fully charged.

IV. How to Maintain the Filter:

1）Pre ss the handle loc ke r to

remove the battery from dust cup.

3）Take out the filter case, then

take out the filter.

4-5

hours

2）Separate and remove the top cover

as showed below.

4）Wash the filter case and the

filter by water.

Troubleshooting

5）Please dry the filter and the filter case

completely before assembling back.

7）Put the filter case back to the

dust cup.

※Troubleshooting:

1, Empty the dust cup

2, Check if the dust cup is installed correctly

Suction gets weak

3, Check if the filter case and the filter are installed

correctly

4, Clean the filter

1, Charge the vacuum

Stop working

2, Clean the roller brush and the bearing thoroughly

Battery doesn't hold

1, Check if the plug has been inserted already

a charger

2, Check if the socket is useful

※Technical Specification:

Battery

22.2V/2200mAh

Charging time

4-5 hours

Battery charger input

100-240V ~ 50/60Hz 0.3A

Battery charger

26V

0.45A

output

Working time

45min(low speed), 25min(high speed)

Power

120W

Largest Suction

9KPa

6）After drying, assemble the filter

to the case.

8）Assemble the top cover to the

dust cup.