DiBiQuadro GeminiPTE Kullanıcı Kılavuzu - Sayfa 8
Stereo Ekolayzer DiBiQuadro GeminiPTE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DiBiQuadro GeminiPTE 11 sayfaları.
Sayfayı Yazdırinside the tooltip ("|" means INSERT
disabled, "_" means INSERT enabled).
After modifying the value press ENTER
to commit or ESC to roll-back to the
latest value set before accessing the
Edit Mode.
SET
SET window
You can open the SET window to
access the configuration settings for
meters, ReSampler and PreRender.
RESET. It restores the default values for
all configurations in the SET window.
LEDs. It activates / deactivates the
meter LEDs.
RealTime and OffLine tabs. These tabs
allow the user to specify different
configurations for the ReSampler, which
are taken into account depending on
the current processing mode.
RealTime
tab.
settings are applied by your DAW
when playbacking tracks through this
plugin. It provides two modes: "Simple"
which allows the selection of pre-
defined
profiles,
which gives you full control on all
ReSampling
parameters.
default settings ("Simple" Mode and
"HighLatencyHighQuality" Profile) an
UpSamplingFactor
44100/48000Hz, of 2x at 88200/96000Hz
is applied. This can be considered more
than enough for the majority of the
applications.
OffLine tab. This mode is set by your
DAW when bouncing a track or the
complete mix. If the elaboration time is
not a constraint for you and you are
cranking the input up, we suggest to
set the UpSamplingFactor to at least
128x
@
44100/48000Hz,
88200/96000Hz in order to minimize the
aliasing artifacts and get super high-
quality harmonic distortion.
ReSamplerBufferSize.
ReSampler Buffer Size in number of
samples.
UpSamplingFactor.
UpSampling Factor applied to the base
input SampleRate. Use it to increase the
quality or your playbacks and renders,
but
take
into
UpSampling
factors
more samples to be processed, and
consequently longer processing times.
8
These
ReSampling
and
"Advanced"
With
the
of
4x
at
64x
@
This
is
the
This
is
the
account
that
high
correspond
to