Diblasi R7-E İşletme ve Bakım - Sayfa 12

Motosiklet Diblasi R7-E için çevrimiçi göz atın veya pdf İşletme ve Bakım indirin. Diblasi R7-E 17 sayfaları. Folding motorbike

6 DISASSEMBLIES

6.1 Rear wheel - reduction unit (fig. 18-19)

Unscrew the lock nut of the screw (A) and

then the screw (A) at the bottom of the left

shock absorber.

Rotate the left shock absorber on its top end so

to keep it removed from the belt guard.

Unscrew the three bolts (B1 - B2 - B3) holding

the belt guard.

Disconnect the brake cable from the brake

backing plate on the right hand side of the

wheel;

While pulling forward the reduction unit arm

(C), remove the primary belt (D);

Remove the screw head (G) through the hole

(H);

Unscrew the nuts (L) holding the wheel to the

fork;

Remove the wheel assembly from the fork;

Disconnect the spring (M) at its end (N);

Remove the arm (C) from its rotation pin

together with the timing belt;

Remove the tap washer (P), unscrew the four

screws (Q) and remove the crown wheel.

For reassembling, the previous steps are to be

carried out in on the reverse.

6.2 Expanding pulley / clutch (fig.18)

For disassembling:

Unscrew the three bolts (B1 - B2 - B3)

holding the belt guard.

unscrew screw (T);

For assembling:

add a drop of loctite (medium grade) in

the screw (T)

tighten the screw (T) with a pneumatic

screwdriver or with a socket wrench while

holding the magnetowheel

For spare parts order see Fig. 21

Fig. 18