HTC 400 DS Kullanıcı Kılavuzu - Sayfa 33

Zemin Makinesi HTC 400 DS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HTC 400 DS 38 sayfaları.

HTC 400 DS
Tip!
Check the minimum recommended cable area before using
an extension cord. You will find the recommended cable area
under Technical data on page 26.
2.0
Sticky coating on the surface being ground. Run half of the
machine on the surface to be cleaned and half on the clean
surface. This removes any residue from the tools.
Check the tools. Ensure that the correct tools are used, that
they are in working order and that they are correctly fitted.
Voltage drop. Check that the cable area meets HTC's
recommendations.
Troubleshooting
25