HTC 21-S Kullanıcı Kılavuzu - Sayfa 12
Ölçüm Cihazları HTC 21-S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HTC 21-S 28 sayfaları. Digital clamp meter
Sayfayı Yazdırresistance, continuity, the instrument automatically
identify and measure. The current is measured with
the clamp, and the other measurements are taken
from the pen input.
)
3
Read the measurement results from the display
screen. The frequency is displayed when the AC
signal is measured.
Note1
: Minimum identifiable DC current 0.8A.
: Minimum identifiable AC current 0.5A.
: Minimum identifiable AC/DC voltage 0.8V.
Note2
Automatic identification priority: resistance, DC
voltage, AC voltage, DC current, AC current.
Professional measurement mode
AC/DC current measurement
)
1
Press the
the meter. After the self-test is completed, the meter
will display
measurement mode.
)
2
Press
the
measurement function.
)
3
In the DC current measurement function, if the
display is not zero when the instrument is not
button to turn on the power supply of
button, set the pointer to "A", and press
button to select AC or DC current
and enter the intelligent
9