EasyPro Symphony Kurulum Talimatları - Sayfa 2

Su Filtrasyon Sistemleri EasyPro Symphony için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. EasyPro Symphony 4 sayfaları.

Placement

Skimmer

STEP TWO - INSTALLING THE PLUMBING AND THE FILTER FALLS

STEP ONE - DESIGN AND LAYOUT

Position your filter falls where you want the waterfall or

Filter

stream to originate. Be sure to have the pond shape out-

lined before excavating. Excavate the pond to the desired

depth and shape - the recommended depth is between

24 and 36 inches. Set aside the soil to be used later while

burying the pipe from the skimmer.

When excavating be sure the ground is level around the

pond perimeter and ensure the filter falls box area is level as

well. Compact the soil that will be under the filter to avoid

settling later.

Thread the 2" male adapter into one of

the ports on the filter using teflon tape

or silicone on the threads.

Thread the 2" plug into the unused

port using teflon tape or silicone on the

Glue the PVC flex pipe into the

male adapter and hold together

until glue is set.

Set the filter box on the

prepared surface. Be sure

filter sits level side to side

and tips forward

Insert the PVC support tubes into the "V" shaped notches in the

bottom of the filter on the Prelude and Melody models, the So-

nata and Symphony models have built in supports instead of the

PVC pipe. Be sure filter does not move while backfilling with dirt

around it.

threads.

" to 1".